Toyota Tundra (2015 year). Manual — part 1754
(a) Disconnect the No. 2 fuel tube from the fuel pressure
regulator (for quick type A)
.
7. DISCONNECT FUEL TUBE SUB-ASSEMBLY
(a) Disconnect the fuel tube from the fuel delivery pipe RH (for
quick type A)
.
(b) Disconnect the fuel tube from the fuel delivery pipe LH (for
quick type A)
.
8. DISCONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
(a) Detach the clamp.
(b) Disconnect the No. 1 fuel pipe sub-assembly from the fuel delivery pipe LH (for quick type B)
.
9. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY RH
3UR-FBE FUEL: FUEL INJECTOR: REMOVAL; 2015 MY Tundra [08...
(a) Disconnect the ventilation hose and No. 6 wire harness
connector.
(b) Remove the No. 3 engine cover.
(c) Remove the 2 bolts and fuel delivery pipe RH.
NOTICE:
When removing the delivery pipe, hold the pipe by both ends
and pull it straight upward.
(d) Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head RH.
10. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY LH
(a) Disconnect the No. 7 wire harness connector.
(b) Remove the No. 1 engine cover sub-assembly.
(c) Remove the 2 bolts and fuel delivery pipe LH.
NOTICE:
When removing the delivery pipe, hold the pipe by both ends
and pull it straight upward.
(d) Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head LH.
11. REMOVE FUEL INJECTOR ASSEMBLY
(a) Remove the fuel injector from the fuel delivery pipe, and then disconnect the injector connector.
NOTICE:
For reinstallation, attach a tag or label to the injector shaft.
3UR-FBE FUEL: FUEL INJECTOR: REMOVAL; 2015 MY Tundra [08...
(b) Remove the O-ring from the fuel injector.
(c) Detach the 3 clamps and then remove the No. 6 wire harness
from the delivery pipe RH.
(d) Detach the 3 clamps and then remove the No. 7 wire harness
from the delivery pipe LH.
3UR-FBE FUEL: FUEL INJECTOR: REMOVAL; 2015 MY Tundra [08...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000000WQQ0ASX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE FUEL: FUEL INJECTOR: INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT FUEL INJECTOR ASSEMBLY
(a) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 - 2
20°C (68°F)
11.6 to 12.4 Ω
If the result is not as specified, replace the injector assembly.
(b) Inspect the injection volume.
CAUTION:
(2) Disconnect the No. 1 fuel pipe sub-assembly (for quick type B)
.
(3) Connect SST to the fuel pipe (the vehicle side).
SST: 09268-31014
09268-41500
09268-41700
95336-08070
3UR-FBE FUEL: FUEL INJECTOR: INSPECTION; 2015 MY Tundra [...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст