Toyota Tundra (2015 year). Manual — part 483
31. FIX CLUTCH DRUM AND INPUT SHAFT ASSEMBLY
(a) Place the oil pump onto the torque converter clutch, and then
place the clutch drum and input shaft assembly onto the oil
pump.
32. REMOVE REVERSE CLUTCH HUB SUB-ASSEMBLY
(a) Using a screwdriver, remove the snap ring.
(b) Remove the reverse clutch reaction sleeve and reverse clutch
hub sub-assembly together with the rear clutch disc set from the
clutch drum.
33. REMOVE REAR CLUTCH DISC SET
(a) Remove the clutch cushion plate, reverse clutch flange, 5 discs and 4 plates from the reverse clutch hub.
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
(b) Remove the reverse clutch flange from the clutch drum.
34. INSPECT REAR CLUTCH DISC
35. INSPECT REVERSE CLUTCH HUB SUB-ASSEMBLY
36. REMOVE FORWARD CLUTCH HUB SUB-ASSEMBLY
(a) Remove the thrust needle roller bearing, forward clutch hub and
No. 3 clutch hub thrust washer from the clutch drum.
37. INSPECT FORWARD CLUTCH HUB SUB-ASSEMBLY
38. REMOVE COAST CLUTCH HUB SUB-ASSEMBLY
(a) Remove the 2 thrust needle roller bearings, coast clutch hub
together with the underdrive 1-way clutch and thrust bearing
race from the clutch drum.
39. INSPECT UNDERDRIVE 1-WAY CLUTCH ASSEMBLY
40. REMOVE UNDERDRIVE 1-WAY CLUTCH ASSEMBLY
(a) Remove the underdrive 1-way clutch from the coast clutch hub.
(b) Remove the No. 2 clutch hub thrust washer from the coast
clutch hub.
41. REMOVE FORWARD MULTIPLE DISC CLUTCH DISC SET
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
(a) Using a screwdriver, remove the hole snap ring.
(b) Remove the flange, 5 discs and 5 plates from the input shaft.
42. INSPECT FORWARD MULTIPLE DISC CLUTCH CLUTCH DISC
43. REMOVE COAST CLUTCH DISC SET
(a) Using a screwdriver, remove the hole snap ring.
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
(b) Remove the flange, 3 discs and 3 plates from the input shaft.
44. INSPECT COAST CLUTCH DISC
45. REMOVE INPUT SHAFT ASSEMBLY
(a) Remove the input shaft from the clutch drum.
46. REMOVE INPUT SHAFT OIL SEAL RING
(a) Remove the 4 oil seal rings from the input shaft.
47. REMOVE COAST CLUTCH PISTON
(a) Place SST on the No. 1 clutch balancer, and compress the return spring with a press.
SST: 09350-30020
09350-07040
(b) Using SST, remove the snap ring.
SST: 09350-30020
09350-07070
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст