Toyota Tundra (2015 year). Manual — part 373
(b) Remove the clutch drum thrust washer and 2 thrust needle
roller bearings.
30. INSPECT NO. 2 1-WAY CLUTCH ASSEMBLY
31. REMOVE NO. 2 1-WAY CLUTCH ASSEMBLY
(a) Remove the No. 2 1-way clutch and clutch drum thrust washer
from the clutch drum and input shaft assembly.
32. FIX CLUTCH DRUM AND INPUT SHAFT ASSEMBLY
(a) Place the oil pump onto the torque converter clutch, and then
place the clutch drum and input shaft assembly onto the oil
pump.
33. REMOVE REVERSE CLUTCH HUB SUB-ASSEMBLY
(a) Using a screwdriver, remove the snap ring.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(b) Remove the reverse clutch reaction sleeve and reverse clutch
hub sub-assembly together with the rear clutch disc set from the
clutch drum.
34. REMOVE REAR CLUTCH DISC SET
(a) Remove the clutch cushion plate, reverse clutch flange, 5 discs and 4 plates from the reverse clutch hub.
(b) Remove the reverse clutch flange from the clutch drum.
35. INSPECT REAR CLUTCH DISC
36. INSPECT REVERSE CLUTCH HUB SUB-ASSEMBLY
37. REMOVE FORWARD CLUTCH HUB SUB-ASSEMBLY
(a) Remove the thrust needle roller bearing, forward clutch hub and
No. 3 clutch hub thrust washer from the clutch drum.
38. INSPECT FORWARD CLUTCH HUB SUB-ASSEMBLY
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
39. REMOVE COAST CLUTCH HUB SUB-ASSEMBLY
(a) Remove the 2 thrust needle roller bearings, coast clutch hub
together with the underdrive 1-way clutch and thrust bearing
race from the clutch drum.
40. INSPECT UNDERDRIVE 1-WAY CLUTCH ASSEMBLY
41. REMOVE UNDERDRIVE 1-WAY CLUTCH ASSEMBLY
(a) Remove the underdrive 1-way clutch from the coast clutch hub.
(b) Remove the No. 2 clutch hub thrust washer from the coast
clutch hub.
42. REMOVE FORWARD MULTIPLE DISC CLUTCH DISC SET
(a) Using a screwdriver, remove the hole snap ring.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(b) Remove the flange, 5 discs and 5 plates from the input shaft.
43. INSPECT FORWARD MULTIPLE DISC CLUTCH CLUTCH DISC
44. REMOVE COAST CLUTCH DISC SET
(a) Using a screwdriver, remove the hole snap ring.
(b) Remove the flange, 3 discs and 3 plates from the input shaft.
45. INSPECT COAST CLUTCH DISC
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст