Toyota Tundra (2015 year). Manual — part 1766
(3) Check for dirt or mud on the pipe and around the connector before disconnection. Clean if
necessary.
(4) Pinch the connector and disconnect the connector and
pipe.
If the connector and the pipe are stuck together, pinch
the connector, push and pull the pipe to disconnect the
pipe.
NOTICE:
Do not use any tools.
plastic bags.
(e) Observe these precautions when connecting the fuel tube connector (for quick type A).
(3) After connecting the pipe and connector, try to pull apart
the pipe and the connector to confirm that they are
securely connected.
(4) for Fuel Pipe Clamp Type:
Install the fuel pipe clamp to the connector.
3UR-FBE FUEL: FUEL SYSTEM: PRECAUTION; 2015 MY Tundra [...
(5) for Fuel Hose Connector Cover Type:
Attach the lock claws to the connector by pushing down
on the cover as shown in the illustration.
(6) Check that there is no fuel leakage.
(f) Observe these precautions when disconnecting the fuel tube connector (for quick type B).
from the pipe.
HINT:
3UR-FBE FUEL: FUEL SYSTEM: PRECAUTION; 2015 MY Tundra [...
disconnect it.
plastic bag.
(g) Observe these precautions when connecting the fuel tube connector (for quick type B).
(1) Check for foreign matter on the pipe and around the connector before connecting it. Clean if
necessary.
NOTICE:
Before connecting the tube connectors to the pipes, check if there is any damage or foreign matter in
the connectors.
After connecting the pipe and connector, check that the pipe and connector are securely connected by
trying to pull them apart.
(3) Check that there is no fuel leakage.
(h) Observe these precautions when disconnecting the fuel tube connector (for quick type C).
connector from the pipe.
(3) If the connector and pipe are stuck together, hold the fuel
pipe by hand and push and pull on the connector. Pull the
two pipes apart to separate the connector.
NOTICE:
Check for any dirt and foreign matter contamination in the
pipe and around the connector. Clean if necessary. Foreign
matter may damage the O-ring or cause leaks in the seal
between the pipe and connector.
Do not use any tools to separate the pipe and connector.
Check for any dirt and foreign matter on the pipe seal
surface. Clean if necessary.
Do not forcibly bend, twist or turn the nylon tube.
Protect the disconnected part by covering it with a plastic bag
and tape after disconnecting the main tube.
If the pipe and connector are stuck together, pinch the
connector between your fingers and turn it carefully to free it.
Then disconnect the main tube.
plastic bag.
(i) Observe these precautions when connecting the fuel tube connector (for quick type C).
(4) After connecting the pipe and connector, check that the
pipe and connector are securely connected by trying to
pull them apart.
3UR-FBE FUEL: FUEL SYSTEM: PRECAUTION; 2015 MY Tundra [...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст