Toyota Tundra (2015 year). Manual — part 1764
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002Z82023X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE FUEL: FUEL SENDER GAUGE ASSEMBLY: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
3UR-FBE FUEL: FUEL SENDER GAUGE ASSEMBLY: COMPONEN...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002Z83024X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE FUEL: FUEL SENDER GAUGE ASSEMBLY: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
(a) Remove the fuel suction with pump and gauge tube assembly
.
2. REMOVE FUEL SENDER GAUGE ASSEMBLY
(a) Disconnect the connector from the fuel suction plate.
(b) Using a screwdriver, remove the cap from the connector.
HINT:
Tape the screwdriver tip before use.
(c) Detach the 2 claws and remove the cover from the
connector.
3UR-FBE FUEL: FUEL SENDER GAUGE ASSEMBLY: REMOVAL; ...
(e) Detach the 2 claws and disconnect the wire harness.
3UR-FBE FUEL: FUEL SENDER GAUGE ASSEMBLY: REMOVAL; ...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002Z81023X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
(a) Check that the float moves smoothly between F and E.
(b) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER
CONNECTION
CONDITION
SPECIFIED
CONDITION
2 - 4
Float level is F
(upper)
111 to 119 Ω
Float level is E
(lower)
506 to 514 Ω
If the result is not as specified, replace the fuel sender gauge
assembly.
3UR-FBE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст