Toyota Tundra (2015 year). Manual — part 1718
(d) Step 2:
(1) Mark each cylinder head bolt head with paint as shown in
the illustration.
(2) Tighten the cylinder head bolts another 90° in the
sequence shown in step 1.
(e) Step 3:
(1) Tighten the cylinder head bolts an additional 90° in the sequence shown in step 1.
(2) Check that the painting marks are now facing rearward.
(f) Install and uniformly tighten the 2 bolts in the sequence
shown in the illustration.
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
5. INSTALL VALVE STEM CAP
6. INSTALL VALVE LASH ADJUSTER ASSEMBLY
(a) Inspect the valve lash adjuster
.
(b) Install the 16 valve lash adjusters to the cylinder head.
NOTICE:
Install the lash adjuster at the same place it was removed from.
7. INSTALL NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
(a) Apply engine oil to the lash adjuster tips and valve stem cap ends.
(b) Install the 16 valve rocker arms as shown in the illustration.
8. INSTALL CAMSHAFTS (for Bank 2)
(a) Install the camshafts
.
9. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH
(a) Install the exhaust manifold RH
.
3UR-FBE ENGINE MECHANICAL: CYLINDER HEAD GASKET (fo...
3UR-FBE ENGINE MECHANICAL: CYLINDER HEAD GASKET (fo...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002BOH02FX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE ENGINE MECHANICAL: DRIVE BELT: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
3UR-FBE ENGINE MECHANICAL: DRIVE BELT: COMPONENTS; ...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002WF6028X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE ENGINE MECHANICAL: DRIVE BELT: ON-VEHICLE INSPECTION; 2015 MY Tundra [08/2014 -
]
ON-VEHICLE INSPECTION
1. INSPECT FAN & GENERATOR V BELT
generator V belt.
The belt is cracked.
The belt is worn out to the extent that the cords are
exposed.
The belt has chunks missing from the ribs.
(b) Check that the belt fits properly in the ribbed grooves.
HINT:
2. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY
(a) Check that nothing gets caught in the tensioner by turning it clockwise and counterclockwise.
If the result is not as specified condition, replace the tensioner.
3UR-FBE ENGINE MECHANICAL: DRIVE BELT: ON-VEHICLE IN...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст