Toyota Tundra (2015 year). Manual — part 852
(f) Using SST, press in spider bearing B until spider bearing A can
be clamped in a vise.
SST: 09950-40011
09951-04010
09952-04010
09953-04030
09954-04010
09957-04010
09958-04011
SST: 09950-60010
09951-00290
SST: 09955-04100
Text in Illustration
*a
Spider Bearing A
*b
Spider Bearing B
*c
Turn
*d
Hold
HINT:
(g) Clamp the protruding universal joint spider bearing in a vise.
(h) Using a brass bar and hammer, tap the universal joint yoke to
remove the universal joint spider bearing.
Text in Illustration
*a
Hammering Point
NOTICE:
Do not tap the intermediate shaft tube.
HINT:
Use the same removal procedure for the universal joint spider
bearing on the opposite side.
(i) Disconnect the intermediate shaft from the propeller shaft.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD):...
(j) Using SST, pull out the universal joint spider bearing from the
propeller shaft yoke.
SST: 09331-60010
SST: 09950-40011
09951-04010
09952-04010
09953-04020
09954-04010
09957-04010
09958-04011
SST: 09955-04100
Text in Illustration
*a
Spider Bearing
*b
Turn
*c
Hold
NOTICE:
Pull out the spider bearing until the SST claws contact the
propeller shaft yoke.
(k) Clamp the protruding universal joint spider bearing in a vise.
(l) Using a brass bar and hammer, tap the propeller shaft yoke to
remove the universal joint spider bearing.
Text in Illustration
*a
Hammering Point
NOTICE:
Do not tap the propeller shaft tube.
HINT:
Use the same removal procedure for the universal joint spider
bearing on the opposite side.
(m) Remove the spider from the propeller shaft.
2. REMOVE NO. 1 CENTER SUPPORT BEARING ASSEMBLY
(a) Fix the center support bearing in a vise.
(c) Place matchmarks on the joint yoke and shaft.
Text in Illustration
*a
Matchmark
3. REMOVE PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
HINT:
Use the same removal procedure for both the sleeve yoke side and flange yoke side universal joint spider
bearings.
(a) Place matchmarks on the flange yoke and shaft, and the sleeve
yoke and shaft.
Text in Illustration
*a
for Sleeve Yoke Side
*b
for Flange Yoke Side
*c
Matchmark
(b) Using a brass bar and hammer, slightly tap in the spider
bearing.
(c) Using needle-nose pliers, remove the snap ring from the grooves.
HINT:
Remove the snap ring on the opposite side using the same procedure.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD):...
(e) Clamp the shaft in a vise between aluminum plates.
(f) Using SST, pull out the universal joint spider bearing from the
shaft.
SST: 09331-60010
SST: 09950-40011
09951-04010
09952-04010
09953-04020
09954-04010
09957-04010
09958-04011
SST: 09955-04100
Text in Illustration
*a
Spider Bearing
*b
Turn
*c
Hold
NOTICE:
Pull out the spider bearing until the SST claws contact the shaft's
universal joint yoke.
(g) Clamp the protruding universal joint spider bearing in a vise.
(h) Using a brass bar and hammer, tap the shaft yoke to remove
the universal joint spider bearing.
Text in Illustration
*a
Hammering Point
NOTICE:
Do not tap the shaft tube.
HINT:
Use the same removal procedure for the universal joint spider
bearing on the opposite side.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD):...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст