Toyota Tundra (2015 year). Manual — part 853
(i) Using SST, pull out the universal joint spider bearing from the
sleeve yoke.
SST: 09331-60010
SST: 09950-40011
09951-04010
09952-04010
09953-04020
09954-04010
09957-04010
09958-04011
SST: 09955-04100
Text in Illustration
*a
Spider Bearing
*b
Turn
*c
Hold
NOTICE:
Pull out the spider bearing until the SST claws contact the sleeve
yoke.
(j) Clamp the protruding universal joint spider bearing in a vise.
(k) Using a brass bar and hammer, tap the sleeve yoke to remove the universal joint spider bearing.
Text in Illustration
*a
Hammering Point
HINT:
Use the same removal procedure for the universal joint spider bearing on the opposite side.
(l) Remove the spider from the sleeve yoke.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD):...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM00000290G00VX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD): INSPECTION; 2015 MY Tundra [08/2014 -
]
INSPECTION
1. INSPECT PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(a) Using a dial indicator, measure the intermediate shaft runout.
Maximum runout:
0.61 mm (0.0240 in.)
If the intermediate shaft runout is more than the maximum,
replace the propeller shaft with center bearing assembly.
(b) Using a dial indicator, measure the propeller shaft runout.
Maximum runout:
1.02 mm (0.0402 in.)
If the propeller shaft runout is more than the maximum, replace
the propeller shaft with center bearing assembly.
2. INSPECT PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
(a) Mount the propeller shaft in a vise.
NOTICE:
Be careful not to grip the propeller shaft tube too tightly in a vise
as this will cause deformation.
(b) Inspect the spider bearing for wear or damage.
Maximum bearing axial play:
0.05 mm (0.00197 in.)
If the spider bearing axial play is more than the maximum, replace the spider bearing.
3. INSPECT NO. 1 CENTER SUPPORT BEARING ASSEMBLY
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD):...
(a) Check that the bearing turns freely.
If the bearing is damaged, worn, or does not turn freely, replace
it.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD):...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002HBM00UX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD): REASSEMBLY; 2015 MY Tundra [08/2014 -
]
REASSEMBLY
1. INSTALL PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
HINT:
Use the same installation procedure for both the sleeve yoke side and flange yoke side universal joint
spider bearings.
(a) Apply MP grease to a new spider and 4 new bearings.
NOTICE:
Be careful not to apply too much grease.
(b) Measure dimension A between the snap ring grooves.
NOTICE:
When measuring dimension B, fix the spider and spider bearings in a vise and hold them firmly together.
(d) Select snap rings to make dimensions A and B the same.
Snap Ring Type for Steel Yoke:
COLOR
THICKNESS
Purple
1.46 mm (0.0574 in.)
Black
1.49 mm (0.0586 in.)
Copper
1.51 mm (0.0594 in.)
White
1.56 mm (0.0614 in.)
Yellow
1.59 mm (0.0625 in.)
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD):...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст