Toyota Tundra (2015 year). Manual — part 2261
A
INSPECTION PROCEDURE
PROCEDURE
1.
READ VALUE USING TECHSTREAM (AIR MIX SERVO MOTOR TARGET PULSE (for
Driver Side))
(a) Use the Data List to check if the servo motor is functioning properly.
Air Conditioner
TESTER DISPLAY
MEASUREMENT ITEM / RANGE
NORMAL
CONDITION
DIAGNOSTIC
NOTE
Air Mix Servo Targ
Pulse (D)
No. 1 damper servo sub-assembly (air mix damper
servo motor [for driver side]) target pulse /
Min.: 0, Max.: 255
MAX. COLD: 5
(pulse)
MAX. HOT: 104
(pulse)
-
OK:
The display is as specified in the normal condition.
Result
RESULT
PROCEED TO
OK (Checking from the DTC)
A
OK (Checking from the PROBLEM SYMPTOMS TABLE)
B
NG
C
B
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN
PROBLEM SYMPTOMS TABLE
C
REPLACE AIR CONDITIONING AMPLIFIER
2.
REPLACE NO. 1 DAMPER SERVO SUB-ASSEMBLY (AIR MIX SERVO MOTOR [for
Driver Side])
(a) Temporarily replace the No. 1 damper servo sub-assembly (air mix damper servo motor [for driver
side]) with a new one
.
HINT:
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor
with a new one and check that the condition returns to normal.
AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic A...
NEXT
NEXT
3.
CHECK FOR DTC
(a) Clear the DTC
.
(b) Check for DTC
.
OK:
DTC is not output.
NG
GO TO STEP 4
OK
END (AIR MIX SERVO MOTOR IS DEFECTIVE)
4.
REPLACE AIR CONDITIONING HARNESS
(a) Replace the air conditioning harness.
5.
CHECK FOR DTC
(a) Clear the DTC
.
(b) Check for DTC again
.
OK:
DTC is not output.
NG
REPLACE AIR CONDITIONING AMPLIFIER
OK
END (AIR CONDITIONING HARNESS IS
DEFECTIVE)
AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic A...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000002VXP00VX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System): B1497/97;
BUS IC Communication Malfunction; 2015 MY Tundra [08/2014 - ]
DTC
B1497/97 BUS IC Communication Malfunction
DESCRIPTION
The air conditioning harness connects the air conditioning amplifier and each servo motor. The air conditioning
amplifier supplies power and sends operation instructions to each servo motor through the air conditioning
harness. Each servo motor sends the damper position information to the air conditioning amplifier.
DTC
CODE
DTC DETECTION
CONDITION
TROUBLE AREA
B1497/97
Communication line error or
open
Air conditioning harness
No. 1 damper servo sub-assembly (air mix damper servo
motor [for driver side])
No. 1 damper servo sub-assembly (air outlet servo motor)
Air mix servo motor (for passenger side)
Air inlet servo motor
Air cool bypass servo motor
Air conditioning amplifier
Harness or connector
WIRING DIAGRAM
AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic A...
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1.
PERFORM ACTIVE TEST USING TECHSTREAM
(a) Select the Active Test, using the Techstream to generate a control command, and then check that
the servo motor operates.
Air Conditioner
AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic A...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст