Toyota Tundra (2015 year). Manual — part 2362
TESTER DISPLAY
TEST PART
CONTROL RANGE
DIAGNOSTIC NOTE
Security Indicator
Security indicator light
ON/OFF
-
ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: DATA LI...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000001TCI034X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: B2780; Push Switch / Key Unlock Warning Switch
Malfunction; 2015 MY Tundra [08/2014 - ]
DTC
B2780
Push Switch / Key Unlock Warning Switch Malfunction
DESCRIPTION
This DTC will be output if the transponder key ECU does not detect that the unlock warning switch is ON even
when the ignition switch is ON. Under normal conditions, the unlock warning switch is ON when the ignition switch
is ON.
DTC
CODE
DTC DETECTION CONDITION
TROUBLE AREA
B2780
Unlock warning switch ON is not detected when the ignition switch is
ON.
Transponder key
ECU
Unlock warning
switch
Harness or connector
WIRING DIAGRAM
INSPECTION PROCEDURE
HINT:
When the transponder key ECU is replaced, reregister the ECU - ECM communication ID
.
PROCEDURE
1.
CLEAR DTC
ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: B2780; P...
NEXT
(a) Clear the DTC
.
2.
CHECK FOR DTC
(a) Check for DTC
.
OK:
DTC B2780 is not output.
NG
GO TO STEP 3
OK
USE SIMULATION METHOD TO CHECK
3.
READ VALUE USING TECHSTREAM (UNLOCK WARNING SWITCH)
(a) Use the Data List to check if the unlock warning switch is functioning properly.
Immobiliser
TESTER
DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC
NOTE
Key SW
Unlock warning switch signal / ON or
OFF
ON: Key is in ignition key cylinder
OFF: No key is in ignition key
cylinder
-
OK:
ON (key is in ignition key cylinder) appears on the screen.
NG
GO TO STEP 4
OK
REPLACE TRANSPONDER KEY ECU
4.
INSPECT UNLOCK WARNING SWITCH
ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: B2780; P...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст