Toyota Tundra (2015 year). Manual — part 590
OK
operating noise.
OK:
Valve moves and makes an operating noise.
NG
REPLACE SHIFT SOLENOID VALVE S3
4.
INSPECT TRANSMISSION VALVE BODY ASSEMBLY
(a) Check the transmission valve body assembly
.
OK:
There are no foreign objects on any valve.
NG
REPAIR OR REPLACE TRANSMISSION VALVE BODY
ASSEMBLY
OK
REPAIR OR REPLACE AUTOMATIC TRANSMISSION
ASSEMBLY
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000000W820BZX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION SYSTEM: P0766,P0776; Shift Solenoid
"D" Performance (Shift Solenoid Valve S4); 2015 MY Tundra [08/2014 - ]
DTC
P0766
Shift Solenoid "D" Performance (Shift Solenoid Valve S4)
DTC
P0776
Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2)
DESCRIPTION
The ECM uses signals from the output shaft speed sensor and input speed sensor to detect the actual gear
position (1st, 2nd, 3rd, 4th, 5th or 6th gear).
Then the ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical
CODE
DTC DETECTION CONDITION
TROUBLE AREA
P0766
S4 stuck OFF malfunction or brake control valve
malfunction*:
Shifting to 5th and 6th gears is impossible.
The ECM determines there is a malfunction when the
following conditions are both met. (2-trip detection
logic)
(a) When the ECM directs the transmission to switch to 5th
gear, the actual gear is shifted to 4th.
(b) When the ECM directs the transmission to switch to 6th
gear, the actual gear is shifted to 4th.
Shift solenoid valve S4
remains closed
Shift solenoid valve SLT
remains open or closed
Valve body is blocked (Brake
control valve)
Automatic transmission
(clutch, brake or gear, etc.)
P0776
SL2 stuck ON malfunction or brake control valve
malfunction*:
Shifting to 5th and 6th gears is impossible.
The ECM determines there is a malfunction when the
following conditions are both met. (2-trip detection
logic)
(a) When the ECM directs the transmission to switch to 5th
gear, the actual gear is shifted to 4th.
(b) When the ECM directs the transmission to switch to 6th
gear, the actual gear is shifted to 4th.
Shift solenoid valve SL2
remains closed
Shift solenoid valve SLT
remains open or closed
Valve body is blocked (Brake
control valve)
Automatic transmission
(clutch, brake or gear, etc.)
HINT:
1st
2nd
3rd
4th
5th
6th
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
*: Actual gear position under malfunction
1st
2nd
3rd
4th
4th
4th
Gear position during fail-safe operation:
If any malfunction is detected, the ECM changes into the fail-safe mode to shift into the gear
positions as shown in the table below.
Gear position under normal conditions
1st
2nd
3rd
4th
5th
6th
*: Actual gear position under fail-safe mode
1st
2nd
3rd
3rd
3rd
3rd
MONITOR DESCRIPTION
solenoid valves "ON/OFF". When the gear position commanded by the ECM and the actual gear position are not
the same, the ECM illuminates the MIL and stores the DTC.
MONITOR STRATEGY
Related DTCs
P0766: Shift solenoid valve S4/Functional check
P0776: Shift solenoid valve SL2/Functional check
Required
sensors/Components
Shift solenoid valve S4, Speed sensor (NT), Speed sensor (SP2), Crankshaft
position sensor (NE)
Duration
0.4 seconds
MIL operation
2 driving cycles
TYPICAL ENABLING CONDITIONS
All
The monitor will run whenever the following
DTCs are not present
P0717 (Turbine speed sensor circuit)
P0722 (Output speed sensor circuit)
P0973, P0974 (Shift solenoid valve S1 circuit)
P0976, P0977 (Shift solenoid valve S2 circuit)
P0979, P0980 (Shift solenoid valve S3 circuit)
P0982, P0983 (Shift solenoid valve S4 circuit)
P0985, P0986 (Shift solenoid valve SR circuit)
P0748 (Shift solenoid valve SL1 circuit)
P0778 (Shift solenoid valve SL2 circuit)
P0115, P0116, P0117, P0118, P011B (ECT (Engine coolant
temperature) sensor circuit)
P0327, P0328, P032C, P032D, P0332, P0333, P033C, P033D
(KCS sensor circuit)
ETCS (Electric Throttle Control System)
Not system down
Transmission position
"D"
Duration time from shifting "N" to "D"
4 seconds or more
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
ECT
40°C (104°F) or higher
Spark advance from max. retard timing by KCS
control
0° crankshaft angle or more
Engine
Starting
Calculated load value
7.75% or more (A/C off)
7.75% or more (A/C on)
Input speed/output speed (NT/NO)
NT: Input (Turbine) speed
NO: Internal counter shaft speed
3.11 to 7.58
or
1.83 to 2.27
or
1.24 to 1.49
or
0.93 to 1.07
or
0.66 to 0.80
or
0.51 to 0.65
P0766 OFF Malfunction (A) and P0776 ON Malfunction (A)
ECM selected gear
5th
Vehicle speed
2 km/h (1.2 mph) or more
Throttle valve opening angle
9% or more at 2000 rpm
(Conditions vary with engine speed)
P0766 OFF Malfunction (B) and P0776 ON Malfunction (B)
ECM selected gear
6th
Vehicle speed
2 km/h (1.2 mph) or more
Throttle valve opening angle
9% or more at 2000 rpm
(Conditions vary with engine speed)
TYPICAL MALFUNCTION THRESHOLDS
[OFF malfunction]
Turbine speed/Output speed (NT/NO)
0.93 or more, and 1.07 or less
(This means actual gear is 4th)
P0766 OFF Malfunction (B)
Turbine speed/Output speed (NT/NO)
0.93 or more, and 1.07 or less
(This means actual gear is 4th)
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст