Toyota Tundra (2015 year). Manual — part 2753
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002H5R00MX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: POWER STEERING: STEERING GEAR: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE FRONT WHEELS
3. REMOVE ENGINE ASSEMBLY
(a) for 3UR-FBE:
Remove the engine assembly
.
(b) for 1UR-FE:
Remove the engine assembly
.
(c) for 3UR-FE:
Remove the engine assembly
.
4. DISCONNECT NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY
(a) Put matchmarks on the No. 2 steering intermediate shaft and
the power steering gear.
(b) Remove the bolt and disconnect the No. 2 steering intermediate shaft from the power steering gear.
5. DISCONNECT TIE ROD END SUB-ASSEMBLY LH
(a) Remove the cotter pin and nut.
(b) Using SST, disconnect the tie rod end LH from the steering
knuckle.
SST: 09610-20012
NOTICE:
Hang SST with a string, etc. to prevent it from falling.
Do not damage the front disc brake dust cover.
Do not damage the ball joint dust cover.
Do not damage the steering knuckle.
POWER STEERING: STEERING GEAR: REMOVAL; 2015 MY Tundr...
6. DISCONNECT TIE ROD END SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
7. DISCONNECT PRESSURE FEED TUBE ASSEMBLY
(a) Using a union nut wrench, disconnect the pressure feed tube
(return tube side) from the power steering gear.
(b) Using a union nut wrench, disconnect the pressure feed tube
(pressure feed tube side) from the power steering gear.
(c) Remove the 2 bolts and disconnect the pressure feed tube
clamp.
8. REMOVE POWER STEERING GEAR ASSEMBLY
POWER STEERING: STEERING GEAR: REMOVAL; 2015 MY Tundr...
(a) Remove the 2 bolts, 2 nuts and power steering gear.
POWER STEERING: STEERING GEAR: REMOVAL; 2015 MY Tundr...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002H5S00LX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: POWER STEERING: STEERING GEAR: DISASSEMBLY; 2015 MY Tundra [08/2014 - ]
DISASSEMBLY
1. FIX POWER STEERING GEAR ASSEMBLY
(a) Using SST, secure the power steering gear.
SST: 09612-00012
HINT:
Tape SST before use.
NOTICE:
When using a vise, do not overtighten it.
2. REMOVE TIE ROD END SUB-ASSEMBLY LH
(a) Put matchmarks on the tie rod end LH and steering rack end.
3. REMOVE TIE ROD END SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
4. REMOVE STEERING RACK BOOT CLIP
(a) Using pliers, remove the 2 steering rack boot clips.
5. REMOVE NO. 2 STEERING RACK BOOT CLAMP
(a) Using pliers, remove the 2 boot clamps as shown in the
illustration.
NOTICE:
Be careful not to damage the No. 2 steering rack boot.
6. REMOVE NO. 2 STEERING RACK BOOT
POWER STEERING: STEERING GEAR: DISASSEMBLY; 2015 MY ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст