Toyota Tundra (2015 year). Manual — part 2754
7. REMOVE NO. 1 STEERING RACK BOOT
8. REMOVE STEERING RACK END SUB-ASSEMBLY
(a) Using a screwdriver and hammer, stake back the washer.
NOTICE:
Do not strike the steering rack.
(b) Using a wrench, hold the steering rack (LH side).
(c) Using SST, remove the steering rack end (LH side) from the
power steering rack.
SST: 09922-10010
NOTICE:
Rotate SST in the direction shown in the illustration.
(d) Using SST, remove the steering rack end (RH side) from the power steering rack.
SST: 09922-10010
NOTICE:
Rotate SST in the direction shown in the illustration.
(e) Remove the 2 claw washers.
9. REMOVE STEERING GEAR RACK GUIDE
POWER STEERING: STEERING GEAR: DISASSEMBLY; 2015 MY ...
(a) Using SST, remove the steering rack guide spring cap nut.
SST: 09922-10010
NOTICE:
Rotate SST in the direction shown in the illustration.
(b) Using a 32 mm hexagon wrench, remove the rack guide spring
cap.
(c) Remove the spring and rack guide.
10. REMOVE POWER STEERING CONTROL VALVE
(c) Remove the 2 bolts.
(d) Pull out the control valve from the rack housing.
(e) Remove the control valve oil seal.
POWER STEERING: STEERING GEAR: DISASSEMBLY; 2015 MY ...
(f) To prevent the oil seal lip from getting damaged, wind vinyl tape
(h) Using a screwdriver, remove the 4 control valve rings.
NOTICE:
Be careful not to damage the grooves for the control valve rings.
11. REMOVE POWER STEERING CONTROL VALVE UPPER OIL SEAL
(a) Using SST and a press, remove the control valve upper bearing
and control valve upper oil seal from the control valve housing.
SST: 09950-60010
09951-00250
SST: 09950-70010
09951-07150
12. REMOVE CYLINDER END STOPPER
POWER STEERING: STEERING GEAR: DISASSEMBLY; 2015 MY ...
(a) Using a screwdriver and hammer, turn the cylinder end stopper
clockwise until the wire end can be seen through the service
hole.
(b) Using a screwdriver and hammer, turn the cylinder end stopper counterclockwise, and remove the wire
and cylinder end stopper.
13. REMOVE POWER STEERING RACK
14. REMOVE POWER STEERING RACK BUSH
(a) Remove the rack bush from the power steering rack.
(b) Using a screwdriver, remove the O-ring from the rack bush.
(c) Using SST, remove the rack bush oil seal.
SST: 09527-21011
SST: 09612-24014
09613-22011
15. REMOVE POWER STEERING CYLINDER TUBE OIL SEAL
(a) Using SST and a press, remove the cylinder tube oil seal.
SST: 09950-60010
09951-00320
SST: 09950-70010
09951-07360
16. REMOVE RACK STEERING PISTON RING
POWER STEERING: STEERING GEAR: DISASSEMBLY; 2015 MY ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст