Toyota Tundra (2015 year). Manual — part 859
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002HBR00CX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD): DISASSEMBLY; 2015 MY Tundra [08/2014
- ]
DISASSEMBLY
1. REMOVE REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
(a) Place matchmarks on the propeller shaft yoke and universal joint yoke.
Text in Illustration
*a
Matchmark
(b) Remove the grease fitting from the spider bearing.
(c) Using a brass bar and hammer, slightly tap in the 4 spider
bearings.
(d) Using needle-nose pliers, remove the 4 snap rings from the grooves.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
(f) Clamp the propeller shaft in a vise between aluminum plates.
(g) Using SST, press in spider bearing B until spider bearing A can
be clamped in a vise.
SST: 09950-40011
09951-04010
09952-04010
09953-04030
09954-04010
09957-04010
09958-04011
SST: 09950-60010
09951-00290
SST: 09955-04100
Text in Illustration
*a
Spider Bearing A
*b
Spider Bearing B
*c
Turn
*d
Hold
HINT:
(h) Clamp the protruding universal joint spider bearing in a vise.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
(i) Using a brass bar and hammer, tap the universal joint yoke to
remove the universal joint spider bearing.
Text in Illustration
*a
Hammering Point
NOTICE:
Do not tap the intermediate shaft tube.
HINT:
Use the same removal procedure for the universal joint spider
bearing on the opposite side.
(j) Disconnect the intermediate shaft from the propeller shaft.
(k) Using SST, pull out the universal joint spider bearing from the
propeller shaft yoke.
SST: 09331-60010
SST: 09950-40011
09951-04010
09952-04010
09953-04020
09954-04010
09957-04010
09958-04011
SST: 09955-04100
Text in Illustration
*a
Spider Bearing
*b
Turn
*c
Hold
NOTICE:
Pull out the spider bearing until the SST claws contact the
propeller shaft yoke.
(l) Clamp the protruding universal joint spider bearing in a vise.
(m) Using a brass bar and hammer, tap the propeller shaft yoke to
remove the universal joint spider bearing.
Text in Illustration
*a
Hammering Point
NOTICE:
Do not tap the propeller shaft tube.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
HINT:
Use the same removal procedure for the universal joint spider
bearing on the opposite side.
(n) Remove the spider from the propeller shaft.
2. REMOVE NO. 1 CENTER SUPPORT BEARING ASSEMBLY
(a) Fix the center support bearing in a vise.
Text in Illustration
*a
Matchmark
3. REMOVE REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
HINT:
Use the same removal procedure for both the front and rear propeller shaft universal joint spider bearings.
(a) Place matchmarks on the flange yoke and shaft.
Text in Illustration
*a
Matchmark
(b) Remove the grease fitting from the spider bearing.
(c) Using a brass bar and hammer, slightly tap in the 4 spider
bearings.
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD):...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст