Toyota Tundra (2015 year). Manual — part 2086
(a) Turn the ignition switch ON, and turn the light control switch to TAIL or HEAD.
(b) Turn the ignition switch OFF and open the driver door. If the light control switch is TAIL, check that the
taillight turns off immediately. If the light control switch is HEAD, check that the headlight and taillight turn
off after approximately 30 seconds.
(c) Turn the ignition switch ON, and turn the light control switch to HEAD.
(d) Turn the ignition switch OFF and open the driver's door. Within 30 seconds, lock all the doors. Check that
the headlight and taillight turn off immediately.
4. CHECK DAYTIME RUNNING LIGHT OPERATION (w/ Daytime Running Light)
(a) Check that the turn signal lights turn on when the light control switch is OFF with the engine running and
the parking brake released. Then check that the lights turn off under the following conditions:
Turn the light control switch to HEAD or AUTO.
LIGHTING: LIGHTING SYSTEM: OPERATION CHECK; 2015 MY ...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000002X0L03YX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: LIGHTING: LIGHTING SYSTEM: CUSTOMIZE PARAMETERS; 2015 MY Tundra [08/2014 - ]
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting.
(5) Select the setting by referring to the table below.
Main Body
DISPLAY
DEFAULT
CONTENTS
SETTING
I/L when ACC
OFF
ON
Illuminates light when ignition switch turned to ACC
(Room light illuminated when interior light switch set to DOOR)
ON / OFF
Lighting Time
15s
Changes illumination duration after door closure
(It will quickly fade out when turning ignition switch ON)
7.5s / 15s / 30s
I/L ON
W/Door key
Unlock
ON
Function to light up room light when unlocking with door key
cylinder
(Room light illuminated when interior light switch set to DOOR)
ON / OFF
Light Auto
OFF Delay
30s
Function to continue illuminating headlight for certain period of
time after closing all doors with ignition switch turned from ON to
OFF under condition that light control switch is at HEAD or AUTO
with the headlight ON
OFF / 30s / 60s /
90s
Interior Light
Control
ON
This function controls the interior lights.
ON / OFF
Sensitivity
NORMAL
LIGHT2 / LIGHT1
/ NORMAL /
DARK1 / DARK2
Disp Ex ON
Sen
NORMAL
light and clock light*2
LIGHT2 / LIGHT1
/ NORMAL /
DARK1 / DARK2
Disp Ex OFF
Sen
NORMAL
indicator light and clock light*3
LIGHT2 / LIGHT1
/ NORMAL /
DARK1 / DARK2
LIGHTING: LIGHTING SYSTEM: CUSTOMIZE PARAMETERS; 20...
HINT:
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*1
System Setting
Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2
HINT:
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding
area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the
surrounding area is darker before turning on the lights.
*2
System Setting
Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2
HINT:
When the setting is closer to the "Light" side, the system dims the indicator lights even when the
surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until
the surrounding area is darker before dimming the indicator lights.
*3
System Setting
Setting
DARK2
DARK1
NORMAL
LIGHT1
LIGHT2
HINT:
(b) Customizing with Multi-display.
(1) Turn the ignition switch ON.
(2) Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Light Settings.
(3) Select the setting by referring to the table below.
Main Body
DISPLAY
DEFAULT
CONTENTS
SETTING
RELEVANT ECU
Interior
Lights Off
Time
15 s
This function controls the interior lights.
OFF, 7.5 s,
15 s or 30
s
Main body ECU
(Driver side
junction block
Light Sensor
Sensitivity
0
(middle
bar)
-2, -1, 0,
+1 or +2
LIGHTING: LIGHTING SYSTEM: CUSTOMIZE PARAMETERS; 20...
DISPLAY
DEFAULT
CONTENTS
SETTING
RELEVANT ECU
Headlights
Off Time
30 s
Function to continue illuminating headlights and taillights
condition that the headlight dimmer switch is in the
AUTO position with the headlights and taillights on.
OFF, 30 s,
60 s or 90
s
HINT:
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*
System Setting
Setting
-2
-1
0
+1
+2
HINT:
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding
area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the
surrounding area is darker before turning on the lights.
LIGHTING: LIGHTING SYSTEM: CUSTOMIZE PARAMETERS; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст