Toyota Tundra (2015 year). Manual — part 2206
Install the front door inside handle bezel plug LH
.
(c) for CrewMax:
Install the front door inside handle bezel plug LH
.
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATO...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM0000030LK00BX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATOR MOTOR (for Rear Door): COMPONENTS;
2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATO...
ILLUSTRATION
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATO...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000030LL00BX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATOR MOTOR (for Rear Door): REMOVAL; 2015
MY Tundra [08/2014 - ]
REMOVAL
HINT:
Use the same procedure for the LH side and RH side.
The procedure listed below is for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the
SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
2. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH
(a) for Double Cab:
Remove the rear door inside handle bezel plug LH
.
(b) for CrewMax:
Remove the rear door inside handle bezel plug LH
.
3. REMOVE REAR UPPER DOOR ARMREST BASE PANEL LH
(a) for Double Cab:
Remove the rear upper door armrest base panel LH
.
(b) for CrewMax:
Remove the rear upper door armrest base panel LH
.
4. REMOVE REAR DOOR FRAME GARNISH LH
(a) for Double Cab:
Remove the rear door frame garnish LH
.
(b) for CrewMax:
Remove the rear door frame garnish LH
.
5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
(a) for Double Cab:
Remove the rear door trim board sub-assembly LH
.
(b) for CrewMax:
Remove the rear door trim board sub-assembly LH
.
6. REMOVE REAR NO. 2 DOOR TRIM BRACKET
(a) for Double Cab:
Remove the rear No. 2 door trim bracket
.
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATO...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст