Toyota Tundra (2015 year). Manual — part 2207
(b) for CrewMax:
Remove the rear No. 2 door trim bracket
.
7. REMOVE REAR DOOR SERVICE HOLE COVER LH
(a) for Double Cab:
Remove the rear door service hole cover LH
.
(b) for CrewMax:
Remove the rear door service hole cover LH
.
8. REMOVE REAR DOOR GLASS RUN LH
(a) for Double Cab:
Remove the rear door glass run LH
.
(b) for CrewMax:
Remove the rear door glass run LH
.
9. REMOVE REAR DOOR REAR LOWER WINDOW FRAME SUB-ASSEMBLY LH
(a) for Double Cab:
Remove the rear door rear lower window frame sub-assembly LH
.
(b) for CrewMax:
Remove the rear door rear lower window frame sub-assembly LH
.
10. REMOVE REAR DOOR GLASS SUB-ASSEMBLY LH
(a) for Double Cab:
Remove the rear door glass sub-assembly LH
.
(b) for CrewMax:
Remove the rear door glass sub-assembly LH
.
11. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY LH
(a) for Double Cab:
Remove the rear door window regulator sub-assembly LH
.
(b) for CrewMax:
Remove the rear door window regulator sub-assembly LH
.
12. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
(a) for Double Cab:
Using a T25 "TORX" driver, remove the 3 screws and motor.
NOTICE:
Be careful when removing the screws as the motor may fall and
become damaged.
(b) for CrewMax:
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATO...
Using a T25 "TORX" driver, remove the 3 screws and motor.
Text in Illustration
*1
Spring
-
-
*a
-
CAUTION:
NOTICE:
Be careful when removing the screws as the motor may fall and become damaged.
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATO...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002CTS011X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATOR MOTOR (for Rear Door): INSPECTION;
2015 MY Tundra [08/2014 - ]
INSPECTION
1. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for Double Cab)
(a) Apply battery voltage to connector terminals 1 and 2.
(b) Check that the motor gear rotates smoothly as follows.
OK:
MEASUREMENT CONDITION
SPECIFIED CONDITION
Battery positive (+) → 1
Battery negative (-) → 2
Motor gear rotates counterclockwise
Battery positive (+) → 2
Battery negative (-) → 1
Motor gear rotates clockwise
If the result is not as specified, replace the rear power window regulator motor assembly LH.
Text in Illustration
*1
Motor Gear
*a
Component without harness connected
(Rear Power Window Regulator Motor Assembly LH)
*b
Clockwise
*c
Counterclockwise
2. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for CrewMax)
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATO...
(a) Apply battery voltage to connector terminals 1 and 2.
(b) Check that the motor gear rotates smoothly as follows.
OK:
MEASUREMENT CONDITION
SPECIFIED CONDITION
Battery positive (+) → 1
Battery negative (-) → 2
Motor gear rotates counterclockwise
Battery positive (+) → 2
Battery negative (-) → 1
Motor gear rotates clockwise
If the result is not as specified, replace the rear power window regulator motor assembly LH.
Text in Illustration
*1
Motor Gear
*a
Component without harness connected
(Rear Power Window Regulator Motor Assembly LH)
*b
Clockwise
*c
Counterclockwise
3. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for Double Cab)
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATO...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст