Toyota Tundra (2015 year). Manual — part 526
13. REMOVE REAR NO. 1 ENGINE MOUNTING INSULATOR
(a) Remove the 4 bolts and rear engine mounting insulator from the
transmission.
14. DISCONNECT WIRE HARNESS AND CONNECTOR
(a) Remove the bolt and disconnect the ground cable.
(b) Tilt the transmission downward.
NOTICE:
Make sure the cooling fan does not contact the fan shroud.
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(c) Disconnect the park/neutral position switch connector, 2
transmission wire connectors and 2 speed sensor connectors.
HINT:
Detach the claw, press down the lever, and then disconnect the
transmission wire connector.
(d) Disconnect the 3 connector clamps and 4 harness clamps.
(e) Remove the 2 bolts and disconnect the harness clamps and wire harness.
15. DISCONNECT BREATHER PLUG HOSE
(a) Disconnect the breather plug hose from the harness clamp
bracket.
16. DISCONNECT NO. 2 WATER BY-PASS PIPE (w/ Trailer Towing System)
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Remove the bolt and disconnect the 2 water by-pass hoses from the transmission oil cooler. Then separate
the by-pass pipe from the automatic transmission.
NOTICE:
transmission oil thermostat.
17. DISCONNECT NO. 2 WATER BY-PASS PIPE (w/o Trailer Towing System)
(a) Remove the bolt and disconnect the 2 water by-pass hoses from
the transmission oil cooler. Then separate the by-pass pipe from
the automatic transmission.
NOTICE:
18. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Remove the 10 bolts and transmission.
NOTICE:
Do not use excess force to pry off the transmission assembly.
19. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/
Trailer Towing System)
(a) Remove the 3 bolts and transmission oil cooler with
transmission oil thermostat.
(b) Separate the oil cooler from the transmission oil thermostat.
(c) Remove the 4 O-rings.
20. REMOVE TRANSMISSION OIL COOLER ASSEMBLY
(w/o Trailer Towing System)
(a) Remove the 3 bolts and transmission oil cooler with
transmission oil cooler spacer.
(b) Separate the transmission oil cooler from the transmission oil
cooler spacer.
(c) Remove the 4 O-rings.
21. REMOVE HARNESS CLAMP BRACKET
(a) Remove the 3 bolts and 3 brackets.
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст