Toyota Tundra (2015 year). Manual — part 527
22. REMOVE TRANSMISSION CONTROL CABLE BRACKET
(a) Remove the 2 bolts and bracket.
23. REMOVE TORQUE CONVERTER ASSEMBLY
(a) Remove the torque converter assembly from the automatic transmission assembly.
NOTICE:
Remove the torque converter assembly from the input shaft horizontally.
24. INSPECT TORQUE CONVERTER ASSEMBLY
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000018ZB059X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION ASSEMBLY: INSTALLATION; 2015 MY
Tundra [08/2014 - ]
INSTALLATION
1. INSTALL TORQUE CONVERTER ASSEMBLY
(a) Using a vernier caliper and straightedge, measure dimension A between the transmission fitting surface of
Text in Illustration
*a
Matchmark
Text in Illustration
*a
Matchmark
HINT:
Turn the torque converter approximately 180°.
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(d) Turn the torque converter and align the matchmarks on the
Text in Illustration
*a
Matchmark
NOTICE:
Do not push on the torque converter when aligning the
matchmarks.
(e) Using a vernier caliper and a straightedge, measure dimension B
shown in the illustration and check that B is greater than A
measured in the first step.
Standard distance:
B = A + 1 mm (0.0394 in.) or more
2. INSTALL TRANSMISSION CONTROL CABLE BRACKET
(a) Install the bracket with the 2 bolts.
Torque:
12 N·m {122 kgf·cm, 9ft·lbf}
3. INSTALL WIRE HARNESS CLAMP BRACKET
(a) Install the front bracket LH with the bolt.
Torque:
8.0 N·m {82 kgf·cm, 71in·lbf}
(b) Install the rear bracket LH with the bolt.
Torque:
29 N·m {296 kgf·cm, 21ft·lbf}
(c) Install the rear engine bracket with the bolt.
Torque:
8.0 N·m {82 kgf·cm, 71in·lbf}
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
4. INSTALL TRANSMISSION OIL COOLER ASSEMBLY (w/o
Trailer Towing System)
(a) Coat 4 new O-rings with ATF.
(b) Install the 4 O-rings, transmission oil cooler spacer and
transmission oil cooler to the automatic transmission assembly
with the 3 bolts.
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
5. INSTALL TRANSMISSION OIL COOLER ASSEMBLY (w/
Trailer Towing System)
(a) Coat 4 new O-rings with ATF.
(b) Install the 4 O-rings, transmission oil thermostat and
transmission oil cooler to the automatic transmission assembly
with the 3 bolts.
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
6. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY
Clutch spline grease:
Toyota Genuine Clutch Spline Grease or equivalent
Maximum grease amount
Approximately 1 g (0.0353 oz.) Centerpiece
Text in Illustration
*1
Torque Converter Centerpiece
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст