Toyota Tundra (2015 year). Manual — part 1749
(a) Remove the 3 bolts and heat insulator.
26. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH
(a) Remove the 10 nuts, exhaust manifold and 2 gaskets.
3UR-FBE EXHAUST: EXHAUST MANIFOLD: REMOVAL; 2015 MY...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000031GV02EX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE EXHAUST: EXHAUST MANIFOLD: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH
(a) Install a new gasket to the cylinder head and a new gasket
to the No. 2 air tube.
HINT:
labeled A and 8 new nuts.
(c) Uniformly tighten the nuts that are not labeled A, and then tighten the 2 nuts labeled A.
Torque:
for nut A -
10 N·m {102 kgf·cm, 7ft·lbf}
except nut A -
21 N·m {214 kgf·cm, 15ft·lbf}
2. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
(a) Install the heat insulator with the 3 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH
3UR-FBE EXHAUST: EXHAUST MANIFOLD: INSTALLATION; 20...
(a) Install a new gasket to the cylinder head and a new gasket
to the No. 3 air tube.
HINT:
labeled A and 8 new nuts.
(c) Uniformly tighten the nuts that are not labeled A, and then tighten the 2 nuts labeled A.
Torque:
for nut A -
10 N·m {102 kgf·cm, 7ft·lbf}
except nut A -
21 N·m {214 kgf·cm, 15ft·lbf}
4. INSTALL NO. 2 EXHAUST MANIFOLD HEAT INSULATOR
(a) Install the heat insulator with the 3 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
5. INSTALL NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY
(a) Align the matchmarks and insert the No. 2 intermediate shaft
into the intermediate shaft.
3UR-FBE EXHAUST: EXHAUST MANIFOLD: INSTALLATION; 20...
(b) Align the matchmarks and insert the No. 2 intermediate
shaft into the power steering gear.
(c) Install the 2 bolts.
Torque:
35 N·m {357 kgf·cm, 26ft·lbf}
6. INSTALL FRONT EXHAUST PIPE ASSEMBLY
7. INSTALL FRONT PROPELLER SHAFT ASSEMBLY
8. CONNECT COOLER COMPRESSOR ASSEMBLY
9. INSTALL GENERATOR ASSEMBLY
10. CONNECT VANE PUMP ASSEMBLY
11. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
12. INSTALL FAN SHROUD
13. INSTALL FAN AND GENERATOR V-BELT
14. CONNECT OUTLET RADIATOR HOSE
15. CONNECT INLET RADIATOR HOSE
16. INSTALL AIR CLEANER ASSEMBLY
17. INSTALL AIR CLEANER HOSE ASSEMBLY
18. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
19. ADD ENGINE COOLANT
20. INSPECT FOR COOLANT LEAK
21. INSPECT FOR EXHAUST GAS LEAK
If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.
22. INSTALL FRONT FENDER APRON SEAL REAR LH
(a) Install the fender apron seal with the 5 clips.
23. INSTALL FRONT FENDER APRON SEAL LH
(a) Install the fender apron seal with the 6 clips.
24. INSTALL FRONT FENDER APRON SEAL REAR RH
(a) Install the fender apron seal with the 5 clips.
3UR-FBE EXHAUST: EXHAUST MANIFOLD: INSTALLATION; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст