Toyota Tundra (2015 year). Manual — part 1748
ILLUSTRATION
3UR-FBE EXHAUST: EXHAUST MANIFOLD: COMPONENTS; 20...
3UR-FBE EXHAUST: EXHAUST MANIFOLD: COMPONENTS; 20...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000031GX02EX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE EXHAUST: EXHAUST MANIFOLD: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from
the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery
terminal notice before proceeding with work
.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE NO. 1 ENGINE UNDER COVER
4. DRAIN ENGINE COOLANT
5. REMOVE V-BANK COVER SUB-ASSEMBLY
6. REMOVE AIR CLEANER HOSE ASSEMBLY
7. REMOVE AIR CLEANER ASSEMBLY
8. DISCONNECT INLET RADIATOR HOSE
9. DISCONNECT OUTLET RADIATOR HOSE
10. REMOVE FAN AND GENERATOR V-BELT
11. REMOVE FAN SHROUD
12. REMOVE FRONT FENDER APRON SEAL RH
(a) Remove the 6 clips and fender apron seal.
13. REMOVE FRONT FENDER APRON SEAL REAR RH
(a) Remove the 5 clips and fender apron seal.
14. REMOVE FRONT FENDER APRON SEAL LH
(a) Remove the 6 clips and fender apron seal.
15. REMOVE FRONT FENDER APRON SEAL REAR LH
(a) Remove the 5 clips and fender apron seal.
16. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
17. DISCONNECT VANE PUMP ASSEMBLY
18. REMOVE GENERATOR ASSEMBLY
19. DISCONNECT COOLER COMPRESSOR ASSEMBLY
20. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
21. REMOVE FRONT EXHAUST PIPE ASSEMBLY
3UR-FBE EXHAUST: EXHAUST MANIFOLD: REMOVAL; 2015 MY...
22. REMOVE NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY
(a) Put matchmarks on the No. 2 steering intermediate shaft and
steering intermediate shaft.
(b) Remove the bolt and disconnect the No. 2 steering intermediate shaft from the steering intermediate
shaft.
(c) Put matchmarks on the No. 2 steering intermediate shaft and
the power steering gear.
(d) Remove the bolt and disconnect the No. 2 steering intermediate shaft from the power steering gear.
23. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR
(a) Remove the 3 bolts and heat insulator.
24. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH
(a) Remove the 10 nuts, exhaust manifold and 2 gaskets.
25. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
3UR-FBE EXHAUST: EXHAUST MANIFOLD: REMOVAL; 2015 MY...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст