Toyota Tundra (2015 year). Manual — part 1756
NOTICE:
(e) Install the No. 1 engine cover sub-assembly.
3. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY RH
(a) Install the 2 delivery pipe spacers and 4 insulators to the
cylinder head RH.
(b) Install the delivery pipe (with injectors) to the cylinder head RH.
(c) Install the 2 bolts.
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
NOTICE:
(e) Connect the No. 6 wire harness connector.
3UR-FBE FUEL: FUEL INJECTOR: INSTALLATION; 2015 MY Tundr...
(f) Connect the ventilation hose.
4. CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
(a) Connect the No. 1 fuel pipe sub-assembly to the fuel delivery
pipe LH (for quick type B)
.
(b) Attach the clamp.
5. CONNECT FUEL TUBE SUB-ASSEMBLY
(a) Connect the fuel tube to the delivery pipe LH (for quick type
A)
.
(b) Connect the fuel tube to the delivery pipe RH (for quick type
A)
.
6. CONNECT NO. 2 FUEL TUBE SUB-ASSEMBLY
(a) Connect the No. 2 fuel tube to the fuel pressure regulator
(for quick type A)
.
7. INSTALL AIR CLEANER HOSE ASSEMBLY
8. INSTALL V-BANK COVER
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INSPECT FOR FUEL LEAK
3UR-FBE FUEL: FUEL INJECTOR: INSTALLATION; 2015 MY Tundr...
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON and Techstream main switch on.
NOTICE:
Do not start the engine.
(c) Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.
(d) Check that there are no fuel leaks after doing maintenance anywhere on the fuel system.
3UR-FBE FUEL: FUEL INJECTOR: INSTALLATION; 2015 MY Tundr...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000003PZZ007X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE FUEL: FUEL PRESSURE PULSATION DAMPER: COMPONENTS; 2015 MY Tundra [08/2014 -
]
COMPONENTS
ILLUSTRATION
ILLUSTRATION
3UR-FBE FUEL: FUEL PRESSURE PULSATION DAMPER: COMP...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст