Toyota Tundra (2015 year). Manual — part 774
4. DISCONNECT TRANSMISSION WIRE
(a) Remove the 2 bolts and 2 temperature sensor clamps.
(b) Disconnect the 2 ATF temperature sensors.
(c) Disconnect the 9 connectors from the solenoid valves.
5. REMOVE TRANSMISSION WIRE
(a) Disconnect the 2 wire connectors.
HINT:
Detach the claw, press down the lever, and then disconnect the transmission wire connector.
(b) Remove the 2 bolts and pull out the 2 transmission wires.
AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: ...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM0000013FS04WX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: INSPECTION; 2015 MY Tundra [08/2014 -
]
INSPECTION
1. INSPECT TRANSMISSION WIRE (ATF TEMPERATURE
SENSOR)
(a) Measure the resistance according to the value(s) in the table
below.
HINT:
Standard resistance:
TESTER CONNECTION
ATF TEMPERATURE
SPECIFIED CONDITION
1 (OT-) - 9 (OT+)
10°C (50°F)
5 to 8 kΩ
1 (OT-) - 9 (OT+)
25°C (77°F)
2.5 to 4.5 kΩ
1 (OT-) - 9 (OT+)
110°C (230°F)
0.22 to 0.28 kΩ
2 (OT2-) - 10 (OT2+)
10°C (50°F)
5 to 8 kΩ
2 (OT2-) - 10 (OT2+)
25°C (77°F)
2.5 to 4.5 kΩ
2 (OT2-) - 10 (OT2+)
110°C (230°F)
0.22 to 0.28 kΩ
If the result is not as specified, replace the transmission wire.
AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: I...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000013BZ063X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: INSTALLATION; 2015 MY Tundra [08/2014 -
]
INSTALLATION
1. INSTALL TRANSMISSION WIRE
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
(c) Connect the 2 transmission wire connectors.
HINT:
2. CONNECT TRANSMISSION WIRE
(a) Connect the 9 connectors to the solenoid valves.
(b) Connect the 2 ATF temperature sensors with the 2 clamps and 2
bolts.
Torque:
for bolt A -
10 N·m {102 kgf·cm, 7ft·lbf}
for bolt B -
11 N·m {112 kgf·cm, 8ft·lbf}
HINT:
Each bolt length is indicated below.
12 mm (0.472 in.) for bolt A
36 mm (1.41 in.) for bolt B
AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: I...
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
(a) Coat a new O-ring with ATF and install it to the oil strainer.
(b) Install the oil strainer with the 4 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
(a) Install the 4 transmission oil cleaner magnets to the oil pan.
(b) Install a new gasket and the oil pan with the 12 bolts.
Torque:
7.4 N·m {75 kgf·cm, 65in·lbf}
AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: I...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст