Toyota Tundra (2015 year). Manual — part 773
(e) Turn the control shaft lever counterclockwise until it stops, and
then turn it clockwise 2 notches to set it to the N position.
(f) Connect the control cable with a new clip and the nut.
Torque:
13 N·m {133 kgf·cm, 10ft·lbf}
NOTICE:
When connecting the cable to the transmission control shaft
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
2. ADJUST SHIFT LEVER POSITION
3. INSPECT SHIFT LEVER POSITION
4. INSTALL CONSOLE BOX ASSEMBLY
AB60F AUTOMATIC TRANSMISSION: TRANSMISSION CONTRO...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002BKW047X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: COMPONENTS; 2015 MY Tundra [08/2014 -
]
COMPONENTS
ILLUSTRATION
AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: ...
AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000013C105IX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: REMOVAL; 2015 MY Tundra [08/2014 -
]
REMOVAL
1. DRAIN AUTOMATIC TRANSMISSION FLUID
(a) Remove the drain plug and gasket, and drain the ATF.
(b) Install a new gasket and the drain plug.
Torque:
20 N·m {204 kgf·cm, 15ft·lbf}
2. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
(a) Remove the 12 bolts, oil pan and gasket from the transmission.
NOTICE:
Some fluid will remain in the oil pan. Remove all the bolts, and
carefully remove the oil pan assembly.
(b) Examine the particles in the pan.
(1) Remove the 4 magnets and use them to collect steel
particles. Carefully inspect the foreign matter and particles in
Steel (magnetic): bearing, gear and clutch plate wear
Brass (non-magnetic): bush wear
3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY
(a) Remove the 4 bolts and oil strainer.
NOTICE:
AB60F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст