Toyota Tundra (2015 year). Manual — part 2516
(d) Detach the 2 guides and remove the upper rear seatback lock
pad in the direction indicated by the arrow shown in the
illustration and remove the separate type rear seatback cover
with pad.
16. REMOVE SEPARATE TYPE REAR SEATBACK COVER
(a) Remove the 9 hog rings and detach the 4 fasteners to remove
the separate type rear seatback cover.
Text in Illustration
*1
Fastener
SEAT: REAR SEAT ASSEMBLY (for CrewMax LH Side): DISASSEMB...
17. REMOVE REAR SEAT SHOULDER BELT HOLE COVER
(a) Detach the 3 guides and remove the rear center seat outer belt
assembly.
(b) Remove the screw.
(c) Detach the 2 guides and remove the rear seat shoulder belt hole cover.
18. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY
(a) Remove the nut.
(b) Detach the guide and remove the rear center seat outer belt assembly.
19. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH
(a) Pull the No. 1 reclining adjuster release handle LH and fold up the rear seat cushion frame sub-assembly
LH.
SEAT: REAR SEAT ASSEMBLY (for CrewMax LH Side): DISASSEMB...
HINT:
Make sure that the rear seat cushion frame sub-assembly LH is locked.
(c) Detach the 2 cable clamps.
(d) Detach the 2 cable clamps.
Text in Illustration
*1
Clamp
*2
Cable Tie
(e) Cut off the cable tie.
SEAT: REAR SEAT ASSEMBLY (for CrewMax LH Side): DISASSEMB...
(f) Remove the 4 screws and No. 1 reclining adjuster release handle
LH.
20. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY LH
HINT:
Do not lock the rear seat cushion frame sub-assembly LH.
(b) Using a T40 "TORX" socket wrench, remove the 2 bolts and rear
seat cushion frame sub-assembly LH.
21. REMOVE REAR SEAT TURN LOCK SUB-ASSEMBLY
SEAT: REAR SEAT ASSEMBLY (for CrewMax LH Side): DISASSEMB...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст