Toyota Tundra (2015 year). Manual — part 2515

(a) Remove the 12 hog rings and detach the 2 fasteners to remove

the separate type rear seat cushion cover.

Text in Illustration

*1

Fastener

6. REMOVE REAR SEAT RECLINING COVER LH

(a) Using a T25 "TORX" socket wrench, remove the 2 screws.

(b) Detach the guide and claw, and then remove the rear seat reclining cover LH.

7. REMOVE REAR SEAT INNER RECLINING COVER LH

(a) Using a T25 "TORX" socket wrench, remove the screw.

(b) Detach the clip.

(c) Detach the 2 guides in the direction indicated by the arrow shown

in the illustration, and then remove the rear seat inner reclining

cover LH.

8. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

(a) Loosen the bolt.

(b) Detach the guide and remove the rear No. 1 seat inner belt assembly LH.

SEAT: REAR SEAT ASSEMBLY (for CrewMax LH Side): DISASSEMB...

9. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

(a) Remove the 3 nuts and rear seat center armrest assembly from

the rear seatback.

(b) Using a T25 "TORX" socket wrench, remove the 2 bolts together

with the 2 bushes.

(c) Remove the rear seat armrest bracket from the rear seat center armrest assembly.

10. REMOVE CUP HOLDER ASSEMBLY

(a) Using moulding remover B, detach the 4 claws and remove the

cup holder assembly.

11. REMOVE REAR NO. 1 SEAT CENTER ARMREST COVER

SEAT: REAR SEAT ASSEMBLY (for CrewMax LH Side): DISASSEMB...

(a) Detach the 3 hooks and remove the rear No. 1 seat center

armrest cover.

12. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY

13. REMOVE REAR SEAT HEADREST SUPPORT

SEAT: REAR SEAT ASSEMBLY (for CrewMax LH Side): DISASSEMB...

(a) Detach the 4 claws and remove the 2 rear seat headrest

supports.

14. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

(a) Detach the 4 claws and remove the 2 rear No. 1 seat headrest

support assemblies.

15. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD

(a) Remove the nut.

Text in Illustration

*1

Rubber Band

(c) Remove the screw.

SEAT: REAR SEAT ASSEMBLY (for CrewMax LH Side): DISASSEMB...