Toyota Tundra (2015 year). Manual — part 2420
A
A
NEXT
RESULT
PROCEED TO
Meter / gauge system DTC is output
C
B
Go to CAN COMMUNICATION SYSTEM
C
Go to DIAGNOSTIC TROUBLE CODE CHART
4.
PROBLEM SYMPTOMS TABLE
(a) Refer to the problem symptoms table
.
Result:
RESULT
PROCEED TO
Fault is not listed in problem symptoms table
A
Fault is listed in problem symptoms table
B
B
Go to step 6
5.
OVERALL ANALYSIS AND TROUBLESHOOTING*
(c) Operation check
6.
REPAIR OR REPLACE
METER: METER / GAUGE SYSTEM: HOW TO PROCEED WITH T...
NEXT
7.
CONFIRMATION TEST
NEXT
END
METER: METER / GAUGE SYSTEM: HOW TO PROCEED WITH T...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000002Z4Q03PX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: METER: METER / GAUGE SYSTEM: OPERATION CHECK; 2015 MY Tundra [08/2014 - ]
OPERATION CHECK
1. INSPECT INDICATOR/WARNING LIGHT
(a) Check the following indicators and warning lights.
INDICATOR/WARNING
LIGHT
SWITCH CONDITION
SPECIFIED CONDITION
ABS warning light
Ignition switch OFF
→ ON
Comes on for 3 seconds
SLIP indicator light
SRS warning light
Ignition switch OFF
→ ON
Comes on for 6 seconds
CHARGE warning light
Ignition switch OFF
→ ON
Illuminates when the ignition switch is turned ON. Turns off
when engine is started.
MIL
2. INSPECT SPEEDOMETER
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Engine and ECT / Data List.
(e) According to the display on Techstream, read the "Data List".
Reference:
for mph
for km/h
TECHSTREAM DISPLAY (MPH)
SPEEDOMETER DISPLAY (MPH)
20
19.1 to 21.6
40
39.3 to 42.1
60
59.6 to 62.4
80
79.8 to 83
100
99.9 to 103.3
120
120 to 125.5
TECHSTREAM DISPLAY (KM/H)
SPEEDOMETER DISPLAY (KM/H)
20
18.3 to 22.3
40
38.5 to 43
60
58.8 to 63.3
80
78.9 to 83.9
METER: METER / GAUGE SYSTEM: OPERATION CHECK; 2015 MY...
TECHSTREAM DISPLAY (KM/H)
SPEEDOMETER DISPLAY (KM/H)
100
99.2 to 104.2
120
119.6 to 124.6
140
139.9 to 144.9
160
160.3 to 165.3
180
180.6 to 185.6
200
201 to 206
NOTICE:
Do not use worn, underinflated or overinflated tires, as the speedometer reading will be inaccurate.
0.5 km/h (0.3 mph)
3. INSPECT TACHOMETER
(a) Connect a tune-up tachometer, and start the engine.
(b) Compare the test results with the tachometer indicator.
DC 13.5 V, at 25°C (77°F):
STANDARD INDICATION (RPM)
ACCEPTABLE RANGE
DATA IN ( ) IS FOR REFERENCE (RPM)
700
630 to 770
1000
(900 to 1100)
2000
(1850 to 2150)
3000
2800 to 3200
4000
(3800 to 4200)
5000
4800 to 5200
6000
(5750 to 6250)
7000
6700 to 7300
If the result is not as specified, the speedometer may have a malfunction.
4. INSPECT METER/GAUGE
(a) Connect the Techstream to the DLC3.
(b) Perform "Active Test"
.
OK:
Each meter/gauge's needle indication is normal.
5. INSPECT WARNING/INDICATOR LIGHT
(a) Connect the Techstream to the DLC3.
(b) Perform "Active Test"
.
OK:
METER: METER / GAUGE SYSTEM: OPERATION CHECK; 2015 MY...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст