Toyota Tundra (2015 year). Manual — part 2419
ITEM
DETAILS
Tire pressure warning light
Receives low tire pressure signal from tire pressure warning ECU (Direct line)
Master warning light
Receives warning signal from each ECU (CAN)
Security indicator light*4
Receives security warning light signal from transponder key ECU (Direct line)
Trailer connection indicator
light*6
Receives trailer connection indicator signal from brake control with bracket
relay (CAN)
A/T P shift position indicator
Receives P signal from ECM (Direct line)
A/T N shift position indicator
Receives N signal from ECM (Direct line)
A/T D shift position indicator
Receives D signal from ECM (Direct line)
A/T 6 shift position indicator
Receives 6 signal from ECM (Direct line)
A/T 5 shift position indicator
Receives 5 signal from ECM (CAN)
A/T 4 shift position indicator
Receives 4 signal from ECM (CAN)
A/T 3 shift position indicator
Receives 3 signal from ECM (CAN)
A/T 2 shift position indicator
Receives 2 signal from ECM (CAN)
A/T 1 shift position indicator
Receives 1 signal from ECM (CAN)
A/T S shift position indicator
Receives S signal from ECM (Direct line)
A/T R shift position indicator
Receives R signal from ECM (Direct line)
*1: for 4WD
*2: for U.S.A.
*3: except U.S.A.
*4: w/ Engine Immobiliser System
*5: w/ Cruise Control System
*6: w/ Trailer Brake Control System
2. MULTI-INFORMATION DISPLAY
*1: w/ Intuitive Parking Assist System
*2: w/ Navigation System
*3: w/ Blind Spot Monitor System
*4: w/ Trailer Brake Control System
When the DISP switch is pressed, the multi-information display is changed between the following: cruise
information display, warning display.
(a) Cruise information display:
The cruise information is displayed in the following order each time the DISP switch is pressed.
METER: METER / GAUGE SYSTEM: SYSTEM DESCRIPTION; 201...
DISPLAY
OUTLINE
Average fuel
economy
Value that has been calculated by combination meter, which is based on distance
driven and fuel consumption volume (fuel injection signal from No. 1 cylinder)
This display is updated every 10 seconds
Current fuel
economy
Value that has been calculated by combination meter. When ignition switch is
turned to ON, combination meter calculates this value based on distance driven
and fuel consumption volume (fuel injection signal from No. 1 injector).
This display is updated every 0.5 seconds
Distance to empty
Value that has been calculated by combination meter. When ignition switch is
turned to ON, combination meter calculates this value based on fuel consumption
data that combination meter continuously monitors and stores in its memory, and
fuel volume data.
This display is updated every km (mile)
Trip timer
Calculates and displays elapsed time since engine start signal was input into
combination meter
This display is updated every second
Average speed
Value that has been calculated by combination meter. This calculation is based on
elapsed time since engine start signal was received by combination meter and
vehicle speed signal received by combination meter.
This display is updated every 10 seconds
Outside
temperature
Displays outside temperature in accordance with the outside temperature sensor signal from
the air conditioning amplifier.
Clearance sonar
display*1
Receives clearance sonar display signal from clearance warning ECU.
Turn by turn
navigation
display*2
Receives turn by turn navigation display signal from navigation receiver.
(b) Warning display:
When a warning is necessary, the warning display interrupts the multi-information display.
DISPLAY
DETAILS
Driver door open
Front passenger door open
Rear left door open
Rear right door open
Any door is open
ENGINE COOLANT OVER TEMP
Engine coolant temperature is more than 120°C (248°F)
MAINTENANCE REQUIRED SOON
Comes on approximately 7242 km (4500 miles) after engine oil
is changed
METER: METER / GAUGE SYSTEM: SYSTEM DESCRIPTION; 201...
DISPLAY
DETAILS
RELEASE PARKING BRAKE
Parking brake is still engaged with vehicle having reached speed
Washer fluid level is low
LOW FUEL LEVEL
Fuel level is low
HIGH TRANSMISSION FLUID TEMPERATURE
ATF temperature is high
MAINTENANCE REQUIRED
Comes on approximately 8047 km (5000 miles) after engine oil
is changed
CHECK SONAR SYSTEM, SEE DEALER*1
System check indication
CLEAN SONAR SENSORS*1
Clean sensor indication
CHECK TRANSMISSION SYSTEM, SEE DEALER ATF temperature sensor in abnormal condition
BLIND SPOT MONITOR NOT AVAILABLE*3
Module in dirty condition
CHECK BLIND SPOT MONITOR SYSTEM, SEE
DEALER*3
System failure
RESETTING MAINTENANCE DATA
INCOMPLETE
System operation condition
METER: METER / GAUGE SYSTEM: SYSTEM DESCRIPTION; 201...
NEXT
NEXT
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000002Z4L04QX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: METER: METER / GAUGE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2015 MY Tundra
[08/2014 - ]
HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
Use these procedures to troubleshoot the meter / gauge system.
*: Use the Techstream.
1.
VEHICLE BROUGHT TO WORKSHOP
2.
INSPECT BATTERY VOLTAGE
(a) Measure the battery voltage with the ignition switch off.
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
3.
CHECK FOR DTC*
(a) Check for DTCs and note any codes that are output
.
(b) Clear the DTCs
.
Result:
RESULT
PROCEED TO
DTC is not output
A
CAN communication system DTC is output
B
METER: METER / GAUGE SYSTEM: HOW TO PROCEED WITH T...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст