Toyota Tundra (2015 year). Manual — part 1063
Last Modified: 9-16-2014
6.6 G
Doc ID: RM00000322N00QX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE ENGINE CONTROL SYSTEM: IGNITION RELAY NO. 2: ON-VEHICLE INSPECTION; 2015 MY Tundra
[08/2014 - ]
ON-VEHICLE INSPECTION
1. REMOVE INTEGRATION RELAY
(a) Remove the engine room relay block cover.
(b) Using a screwdriver, detach the 2 claws and remove the
integration relay from the engine room relay block.
HINT:
Tape the screwdriver tip before use.
(c) Disconnect the 3 connectors.
2. INSPECT INTEGRATION RELAY (IG2)
NOTICE:
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
IG2 MAIN fuse
Always
Below 1 Ω
If the result is not as specified, replace the IG2 MAIN fuse.
below.
Standard Resistance:
TESTER
CONNECTION
CONDITION
SPECIFIED
CONDITION
1C-1 - 1B-8
When battery voltage is not
applied to terminals 1B-6 and
1B-7
10 kΩ or higher
When battery voltage is applied
to terminals 1B-6 and 1B-7
Below 1 Ω
If the result is not as specified, replace the integration relay.
3. INSTALL INTEGRATION RELAY
1UR-FE ENGINE CONTROL SYSTEM: IGNITION RELAY NO. 2: ...
(a) Connect the 3 connectors.
(b) Install the integration relay to the engine room relay block.
(c) Install the engine room relay block cover.
1UR-FE ENGINE CONTROL SYSTEM: IGNITION RELAY NO. 2: ...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM0000031ZX021X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
1UR-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR: COMP...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст