Toyota Tundra (2015 year). Manual — part 1442
3UR-FBE EMISSION CONTROL: AIR SWITCHING VALVE: COM...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000030WH02KX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE EMISSION CONTROL: AIR SWITCHING VALVE: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY
2. REMOVE INTAKE MANIFOLD
3. REMOVE FAN SHROUD
4. REMOVE NO. 9 WATER BY-PASS HOSE
(a) Slide the 2 clamps and remove the No. 9 water by-pass hose
from the separator case and front water by-pass joint.
Text in Illustration
*1
No. 9 Water By-pass Hose
*2
No. 10 Water By-pass Hose
5. REMOVE NO. 10 WATER BY-PASS HOSE
(a) Slide the 2 clamps and remove the No. 10 water by-pass hose from the front water by-pass joint and
water inlet housing.
6. REMOVE NO. 1 WATER BY-PASS HOSE
(a) Slide the 2 clamps and remove the No. 1 water by-pass hose
from the front water by-pass joint.
Text in Illustration
*1
No. 1 Water By-pass Hose
*2
No. 2 Water By-pass Hose
7. DISCONNECT NO. 2 WATER BY-PASS HOSE
(a) Slide the clamp and disconnect the No. 2 water by-pass hose from the front water by-pass joint.
8. DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY
3UR-FBE EMISSION CONTROL: AIR SWITCHING VALVE: REMO...
(a) Remove the 3 bolts and disconnect the No. 2 water by-pass
pipe sub-assembly.
9. REMOVE NO. 2 ENGINE COVER
10. DISCONNECT FUEL TUBE CLAMP
(a) Disconnect the fuel tube clamp from the bracket.
11. REMOVE NO. 1 ENGINE COVER
12. REMOVE FRONT WATER BY-PASS JOINT
(a) Disconnect the engine coolant temperature sensor connector.
3UR-FBE EMISSION CONTROL: AIR SWITCHING VALVE: REMO...
(b) Remove the 4 nuts, front water by-pass joint and 2 gaskets.
13. REMOVE NO. 3 WATER BY-PASS PIPE
HINT:
(a) Remove the bolt and No. 3 water by-pass pipe.
14. REMOVE AIR TUBE
(a) Slide the 2 clamps and disconnect the No. 2 air hose and No.
3 air hose.
Text in Illustration
*1
No. 2 Air Hose
*2
No. 3 Air Hose
(b) Disconnect the air pump connector.
(c) Disconnect the air pump connector clamp holder.
(d) Using a clip remover, detach the wire harness claw.
(e) Remove the 2 bolts and air tube.
(f) Disconnect the 2 No. 1 air hoses from the air tube.
15. REMOVE AIR SWITCHING VALVE ASSEMBLY
3UR-FBE EMISSION CONTROL: AIR SWITCHING VALVE: REMO...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст