Toyota Tundra (2015 year). Manual — part 735
(a) Using a screwdriver, remove the hole snap ring.
(b) Remove the flange, 4 discs and 4 plates from the input shaft.
45. INSPECT COAST CLUTCH DISC
46. REMOVE INPUT SHAFT SUB-ASSEMBLY
(a) Remove the input shaft from the clutch drum.
47. REMOVE INPUT SHAFT OIL SEAL RING
(a) Remove the 4 oil seal rings from the input shaft.
48. REMOVE COAST CLUTCH PISTON
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Place SST on the No. 1 clutch balancer, and compress the return spring with a press.
SST: 09350-30020
09350-07040
(b) Using SST, remove the snap ring.
SST: 09350-30020
09350-07070
(c) Remove the No. 1 clutch balancer and forward clutch return
spring from the input shaft.
(d) Remove the O-ring from the No. 1 clutch balancer.
(e) Hold the coast clutch piston by hand and apply compressed air
to the input shaft to remove the coast clutch piston.
49. INSPECT FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY
50. REMOVE FORWARD CLUTCH PISTON SUB-ASSEMBLY
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Hold the forward clutch piston by hand and apply compressed air to the input shaft to remove the forward
clutch piston.
(b) Remove the O-ring from the input shaft.
51. INSPECT FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY
52. REMOVE DIRECT CLUTCH DISC SET
(a) Using a screwdriver, remove the 2 hole snap rings from the clutch drum.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(b) Remove the direct clutch flange, 5 discs and 5 plates from the
clutch drum.
53. INSPECT DIRECT CLUTCH DISC
54. REMOVE NO. 3 CLUTCH BALANCER
(a) Place SST on the No. 3 clutch balancer, and compress the return spring with a press.
SST: 09380-60010
09381-06020
09381-06030
09381-06040
09381-06050
09381-06080
(b) Using SST, remove the snap ring.
SST: 09350-30020
09350-07070
(c) Remove the No. 3 clutch balancer.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст