Toyota Tundra (2015 year). Manual — part 192
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000001K6601VX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: BRAKE: BRAKE MASTER CYLINDER: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
BRAKE: BRAKE MASTER CYLINDER: COMPONENTS; 2015 MY ...
ILLUSTRATION
BRAKE: BRAKE MASTER CYLINDER: COMPONENTS; 2015 MY ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000001K6701WX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: BRAKE: BRAKE MASTER CYLINDER: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
NOTICE:
Release the vacuum from the booster by depressing the brake pedal several times. Then remove the brake
master cylinder sub-assembly from the brake booster assembly.
1. DRAIN BRAKE FLUID
NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.
2. DISCONNECT BRAKE FLUID LEVEL WARNING SWITCH
CONNECTOR
(a) Disconnect the brake fluid level warning switch connector.
3. DISCONNECT FRONT NO. 1 BRAKE TUBE
(a) Using a union nut wrench, disconnect the brake tube (labeled A)
from the brake master cylinder.
4. DISCONNECT REAR NO. 1 BRAKE TUBE
(a) Using a union nut wrench, disconnect the brake tube (labeled B) from the brake master cylinder.
5. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY
(a) Remove the 2 nuts and brake master cylinder from the brake
booster.
NOTICE:
The master cylinder requires careful handling. Do not allow the
master cylinder to receive any impact, such as from being
dropped. Do not reuse a master cylinder that has been dropped.
Do not strike or pinch the master cylinder piston, and do not
cause any damage to the master cylinder piston by any other
means.
When installing the master cylinder to the brake booster, or
BRAKE: BRAKE MASTER CYLINDER: REMOVAL; 2015 MY Tundr...
BRAKE: BRAKE MASTER CYLINDER: REMOVAL; 2015 MY Tundr...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст