Toyota Tundra (2015 year). Manual — part 333
OK
(a) Disconnect the D35 park/neutral position switch connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION
SWITCH CONDITION
SPECIFIED CONDITION
D35-2 (RB) - Body ground
Ignition switch ON
11 to 14 V
D35-2 (RB) - Body ground
Ignition switch off
Below 1 V
Text in Illustration
*a
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
(PARK/NEUTRAL POSITION SWITCH - IGNITION
SWITCH)
4.
CHECK TRANSMISSION CONTROL SWITCH (POWER SOURCE)
(a) for Column Shift Type:
(1) Disconnect the J25 transmission control switch connector.
(2) Measure the voltage according to the value(s) in the table
below.
Standard Voltage:
TESTER CONNECTION
SWITCH
CONDITION
SPECIFIED
CONDITION
J25-6 (IG) - Body
ground
Ignition switch ON
11 to 14 V
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
OK
TESTER CONNECTION
SWITCH
CONDITION
SPECIFIED
CONDITION
J25-6 (IG) - Body
ground
Ignition switch off
Below 1 V
Text in Illustration
*a
(b) for Floor Shift Type:
(1) Disconnect the J24 transmission control switch connector.
(2) Measure the voltage according to the value(s) in the table
below.
Standard Voltage:
TESTER CONNECTION
SWITCH
CONDITION
SPECIFIED
CONDITION
J24-3 (IG) - Body
ground
Ignition switch ON
11 to 14 V
J24-3 (IG) - Body
ground
Ignition switch off
Below 1 V
Text in Illustration
*a
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
(TRANSMISSION CONTROL SWITCH - IGNITION
SWITCH)
5.
CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - ECM)
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Disconnect the D74 ECM connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
D74-2 (P) - Body ground
D74-120 (NSW) - Body ground
Ignition switch ON
Shift lever in P
11 to 14 V
D74-26 (R) - Body ground
Ignition switch ON
Shift lever in R
11 to 14 V*
D74-25 (N) - Body ground
D74-120 (NSW) - Body ground
Ignition switch ON
Shift lever in N
11 to 14 V
D74-27 (D) - Body ground
Ignition switch ON
Shift lever in D
11 to 14 V
D74-2 (P) - Body ground
D74-120 (NSW) - Body ground
Ignition switch ON
Shift lever not in P
Below 1 V
D74-26 (R) - Body ground
Ignition switch ON
Shift lever not in R
Below 1 V
D74-25 (N) - Body ground
D74-120 (NSW) - Body ground
Ignition switch ON
Shift lever not in N
Below 1 V
D74-27 (D) - Body ground
Ignition switch ON
Shift lever not in D
Below 1 V
Text in Illustration
*a
HINT:
REPAIR OR REPLACE HARNESS OR CONNECTOR
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
OK
6.
CHECK HARNESS AND CONNECTOR (TRANSMISSION CONTROL SWITCH - ECM)
(a) Disconnect the A24 ECM connector.
(b) Turn the ignition switch to ON.
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
A24-25 (S) - Body ground
Shift lever in S, "+" or "-"
11 to 14 V
A24-25 (S) - Body ground
Shift lever not in S, "+" or "-"
Below 1 V
Text in Illustration
*a
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE ECM
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст