Toyota Tundra (2015 year). Manual — part 1344
(c) Step 1:
(1) Using a 10 mm bi-hexagon wrench, install and uniformly
tighten the 10 cylinder head bolts with the plate washers in
several steps, in the sequence shown in the illustration.
Torque:
36 N·m {367 kgf·cm, 27ft·lbf}
(d) Step 2:
(1) Mark each cylinder head bolt head with paint as shown in the
illustration.
(2) Tighten the cylinder head bolts another 90° in the sequence
shown in step 1.
(e) Step 3:
(1) Tighten the cylinder head bolts an additional 90° in the sequence shown in step 1.
(2) Check that the painted marks are now facing rearward.
(f) Install and uniformly tighten the 2 bolts in the sequence shown
in the illustration.
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
5. INSTALL VALVE STEM CAP
6. INSTALL VALVE LASH ADJUSTER ASSEMBLY
(a) Inspect the valve lash adjuster
.
(b) Install the 16 lash adjusters to the cylinder head.
NOTICE:
Install the lash adjuster at the same place it was removed from.
7. INSTALL NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
(a) Apply engine oil to the lash adjuster tips and valve stem cap ends.
1UR-FE ENGINE MECHANICAL: CYLINDER HEAD GASKET (for...
(b) Install the 16 valve rocker arms as shown in the illustration.
8. INSTALL CAMSHAFTS (for Bank 1)
(a) Install the camshafts
.
9. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH
(a) Install the exhaust manifold LH
.
1UR-FE ENGINE MECHANICAL: CYLINDER HEAD GASKET (for...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002S54025X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE ENGINE MECHANICAL: CYLINDER HEAD GASKET (for Bank 2): COMPONENTS; 2015 MY Tundra
[08/2014 - ]
COMPONENTS
ILLUSTRATION
1UR-FE ENGINE MECHANICAL: CYLINDER HEAD GASKET (for...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002S5504GX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE ENGINE MECHANICAL: CYLINDER HEAD GASKET (for Bank 2): REMOVAL; 2015 MY Tundra
[08/2014 - ]
REMOVAL
1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH
(a) Remove the exhaust manifold RH
.
2. REMOVE CAMSHAFTS (for Bank 2)
(a) Remove the camshafts
.
3. REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
(a) Remove the 16 valve rocker arms from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
4. REMOVE VALVE LASH ADJUSTER ASSEMBLY
(a) Remove the 16 valve lash adjusters from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
5. REMOVE VALVE STEM CAP
(a) Remove the 16 valve stem caps from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
6. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH
(a) Uniformly loosen and remove the 2 bolts in the sequence shown
in the illustration.
1UR-FE ENGINE MECHANICAL: CYLINDER HEAD GASKET (for...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст