Toyota Tundra (2015 year). Manual — part 1042
(a) Remove the 2 bolts and EGR cooler.
7. REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY
(a) Remove the 2 bolts, No. 2 EGR pipe and gasket.
NOTICE:
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000040K300GX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE EMISSION CONTROL: EGR COOLER: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL NO. 2 EGR PIPE SUB-ASSEMBLY
(a) Install a new gasket and the No. 2 EGR pipe with the 2 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
NOTICE:
Make sure the gasket's claws are not caught between the No. 2
EGR pipe and EGR cooler.
2. INSTALL EGR COOLER ASSEMBLY
(a) Install the EGR cooler with the 2 bolts.
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
3. INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY
4. CONNECT NO. 11 WATER BY-PASS HOSE
1UR-FE EMISSION CONTROL: EGR COOLER: INSTALLATION; 20...
(a) Connect the No. 11 water by-pass hose.
HINT:
(a) Connect the No. 8 water by-pass hose.
HINT:
(a) Install the No. 3 water by-pass pipe with the 2 bolts and connect
the hose.
HINT:
10 N·m {102 kgf·cm, 7ft·lbf}
(b) Connect the No. 4 water by-pass hose.
7. INSTALL INTAKE MANIFOLD ASSEMBLY
(a) Install the intake manifold
.
1UR-FE EMISSION CONTROL: EGR COOLER: INSTALLATION; 20...
1UR-FE EMISSION CONTROL: EGR COOLER: INSTALLATION; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст