Toyota Tundra (2015 year). Manual — part 2931
(1) Remove the release paper and apply the tape carefully with your fingers.
(2) Before applying the tape to each corner, heat the tape using a heat light and gradually apply it to avoid
wrinkles in the tape and achieve a neat finish.
(g) Check after installation
(1) After completing the application, check if the tape is applied neatly. If the tape is not applied neatly,
apply new tape.
NOTICE:
Do not reuse the tape.
(h) for Regular Cab:
(1) Using a heat light, heat the vehicle body and a new rear
body No. 3 protector LH.
body No. 3 protector LH.
(1) Using a heat light, heat the vehicle body and a new rear
body No. 3 protector LH.
body No. 3 protector LH.
EXTERIOR: SIDE MOULDING: INSTALLATION; 2015 MY Tundra [...
(1) Using a heat light, heat the vehicle body and a new rear
body No. 3 protector LH.
body No. 3 protector LH.
HINT:
When installing the lower No. 1 side panel moulding LH, heat the vehicle body and lower No. 1 side panel
moulding LH using a heat light.
Standard:
ITEM
TEMPERATURE
Vehicle Body
40 to 60°C (104 to 140°F)
Lower No. 1 Side Panel Moulding LH
20 to 30°C (68 to 86°F)
NOTICE:
Do not heat the vehicle body or lower No. 1 side panel moulding LH excessively.
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) for Regular Cab:
(1) Using a heat light, heat the vehicle body and lower No. 1 side panel moulding LH.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Attach the 2 clips to install a new lower No. 1 side panel moulding LH.
HINT:
Press the lower No. 1 side panel moulding LH firmly to install it.
(c) for Double Cab:
(1) Using a heat light, heat the vehicle body and lower No. 1 side panel moulding LH.
EXTERIOR: SIDE MOULDING: INSTALLATION; 2015 MY Tundra [...
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Attach the 2 clips to install a new lower No. 1 side panel moulding LH.
HINT:
Press the lower No. 1 side panel moulding LH firmly to install it.
(d) for CrewMax:
(1) Using a heat light, heat the vehicle body and lower No. 1 side panel moulding LH.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Attach the 2 clips to install a new lower No. 1 side panel moulding LH.
HINT:
Press the lower No. 1 side panel moulding LH firmly to install it.
EXTERIOR: SIDE MOULDING: INSTALLATION; 2015 MY Tundra [...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002W7U00BX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: EXTERIOR: SIDE STEP: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
EXTERIOR: SIDE STEP: COMPONENTS; 2015 MY Tundra [08/2014 - ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст