Toyota Tundra (2015 year). Manual — part 2641
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002VLY00IX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: COMPONENTS; 2015 MY Tundra [08/2014 -
]
COMPONENTS
ILLUSTRATION
CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: COMPO...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002VLZ00NX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from
the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery
terminal notice before proceeding with work
.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable
the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
3. REMOVE LOWER NO. 2 STEERING WHEEL COVER
4. REMOVE LOWER NO. 3 STEERING WHEEL COVER
5. REMOVE STEERING PAD
6. REMOVE CRUISE CONTROL MAIN SWITCH
(a) Disconnect the connector.
(b) Remove the 2 screws and cruise control main switch.
CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: REMOVA...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002VLX00IX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT CRUISE CONTROL MAIN SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Text in Illustration
*1
Component without harness connected
(Cruise Control Main Switch)
-
-
Standard Resistance:
TESTER CONNECTION
SWITCH CONDITION
SPECIFIED CONDITION
1 (ECC) - 3 (CCS)
Neutral
10 kΩ or higher
+RES
235 to 245 Ω
-SET
620 to 640 Ω
CANCEL
1510 to 1570 Ω
Main Switch OFF
10 kΩ or higher
Main Switch ON
Below 1.5 Ω
If the result is not as specified, replace the cruise control main switch.
CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSPEC...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002VLW00NX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION; 2015 MY Tundra [08/2014 -
]
INSTALLATION
1. INSTALL CRUISE CONTROL MAIN SWITCH
(a) Install the cruise control main switch with the 2 screws.
(b) Connect the connector.
2. INSTALL STEERING PAD
3. INSTALL LOWER NO. 3 STEERING WHEEL COVER
4. INSTALL LOWER NO. 2 STEERING WHEEL COVER
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
6. CHECK SRS WARNING LIGHT
CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALL...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст