Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 295
LIGHTING – HEADLIGHT ASSEMBLY
LI–75
LI
2.
INSTALL HEADLIGHT, NO. 1 BULB
(a) Install the headlight, No. 1 bulb.
(b) Lock the set spring by moving it in the directions
indicated by the arrows in the illustration.
(c) Install the socket cover.
3.
INSTALL HEADLIGHT ASSEMBLY
(a) Install the headlight with the 3 nuts.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
E127234
E127196
E127194
E127239
LI–76
LIGHTING – HEADLIGHT ASSEMBLY
LI
INSTALLATION
1.
INSTALL HEADLIGHT ASSEMBLY
(a) Install the headlight onto the vehicle.
(b) Tighten the 3 screws.
(c) Connect the 2 connectors.
2.
INSTALL FRONT BUMPER FILLER
(a) Engage the 2 claws and clip and install the front
bumper filler.
3.
INSTALL RADIATOR GRILLE (See page
)
4.
CONNECT CABLE TO NEGATIVE BATTERY
TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
Pin
E127193E01
E127192
LIGHTING – REAR COMBINATION LIGHT ASSEMBLY
LI–77
LI
BODY ELECTRICAL
LIGHTING
REAR COMBINATION LIGHT ASSEMBLY
COMPONENTS
REAR SEATBACK
ASSEMBLY LH
REAR SEATBACK
ASSEMBLY RH
REAR SEATBACK BOARD
CARPET ASSEMBLY LH
REAR SEATBACK BOARD
CARPET ASSEMBLY RH
37 (375, 27)
N*m (kgf*cm, ft*lbf) : Specified torque
37 (375, 27)
37 (375, 27)
42 (430, 31)
37 (375, 27)
REAR SEAT INNER
BELT ASSEMBLY RH
REAR CENTER SEAT
INNER BELT ASSEMBLY
REAR SEAT INNER
BELT ASSEMBLY LH
B130654E01
LI–78
LIGHTING – REAR COMBINATION LIGHT ASSEMBLY
LI
REAR FLOOR BOARD
REAR FLOOR MAT
ASSEMBLY
REAR FLOOR MAT
SUPPORT PLATE
LUGGAGE HOLD BELT
STRIKER ASSEMBLY
LUGGAGE HOLD BELT
STRIKER ASSEMBLY
x2
x5
LUGGAGE HOLD BELT
STRIKER ASSEMBLY
B130655E01
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст