Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 293
LIGHTING – HEADLIGHT ASSEMBLY
LI–67
LI
BODY ELECTRICAL
LIGHTING
HEADLIGHT ASSEMBLY
COMPONENTS
FRONT BUMPER FILLER
HEADLIGHT
ASSEMBLY
RADIATOR GRILLE
CLIP
x2
x2
x3
E127200E01
LI–68
LIGHTING – HEADLIGHT ASSEMBLY
LI
FRONT TURN
SIGNAL LIGHT BULB
HEADLIGHT
ASSEMBLY
HEADLIGHT,
NO. 1 BULB
FRONT TURN SIGNAL
LIGHT SOCKET
x3
SOCKET COVER
x3
FRONT COMBINATION
LIGHT ASSEMBLY
N*m (kgf*cm, ft*lbf) : Specified torque
5.4 (55, 48 in.*lbf)
E127247E01
LIGHTING – HEADLIGHT ASSEMBLY
LI–69
LI
REMOVAL
HINT:
•
Use the same procedure for both the RH and LH sides.
•
The procedure described below is for the LH side.
1.
DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2.
REMOVE RADIATOR GRILLE (See page
)
3.
REMOVE FRONT BUMPER FILLER
(a) Disengage the 2 claws and clip and remove the
front bumper filler.
4.
REMOVE HEADLIGHT ASSEMBLY
(a) Disconnect the 2 connectors.
(b) Remove the 3 screws.
(c) Disengage the clip and pin and slide the headlight
toward the front of the vehicle.
DISASSEMBLY
1.
REMOVE HEADLIGHT ASSEMBLY
(a) Remove the 3 nuts and the headlight.
E127192
Pin
E127193E01
E127239
LI–70
LIGHTING – HEADLIGHT ASSEMBLY
LI
2.
REMOVE HEADLIGHT, NO. 1 BULB
(a) Remove the socket cover.
(b) Push the set spring, and pull it in the direction
indicated by the arrows in the illustration, to
disengage it.
(c) Remove the headlight, No. 1 bulb.
NOTICE:
Do not touch the bulb glass with your fingers.
3.
REMOVE FRONT TURN SIGNAL LIGHT BULB
(a) Turn the front turn signal light socket and bulb, in
the direction indicated by the arrow in the
illustration, to remove them.
(b) Remove the front turn signal light bulb from the light
socket.
E127194
E127195
E127234
E127197
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст