Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 246
INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY
IP–27
IP
20. INSTALL INSTRUMENT PANEL FINISH PANEL END
LH
(a) Engage the 3 claws and install the instrument panel
finish panel end.
21. INSTALL ASSIST GRIP RETAINER RH
(a) Install the assist grip retainer with the 2 bolts.
Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)
22. INSTALL ASSIST GRIP RETAINER LH
HINT:
Use the same procedure as for the RH side.
23. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (See
page
24. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER
PANEL SUB-ASSEMBLY
(a) Engage the 4 clips and claw and install the
instrument panel speaker panel.
25. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER
PANEL SUB-ASSEMBLY
HINT:
Use the same procedure as for the RH side.
26. INSTALL NO. 2 INSTRUMENT PANEL REGISTER
ASSEMBLY
(a) Engage the 4 clips and 2 claws and install the
instrument panel register.
(b) Install the clip.
B133889
B133881
B133865
B133858
IP–28
INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY
IP
27. INSTALL INSTRUMENT PANEL LOWER FINISH
PANEL SUB-ASSEMBLY RH
(a) Install the connectors to the instrument panel lower
finish panel.
(b) Engage the claw and 2 clips and install the
instrument panel lower finish panel.
(c) Install screw <A>.
28. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
(a) Install the glove compartment door assembly with
the 3 hinges while holding it horizontal.
(b) Slightly flex the upper part of the glove compartment
door assembly, and install the glove compartment
door assembly.
(c) Install the glove compartment door stoppers onto
the glove compartment door.
29. INSTALL COMBINATION METER ASSEMBLY
(a) Connect the 2 connectors and the clamp.
B133857
B133856
2 Stoppers
B133854E01
B133863
INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY
IP–29
IP
(b) Install the combination meter assembly with the 4
screws.
Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)
30. INSTALL INSTRUMENT CLUSTER LOWER FINISH
PANEL
(a) Connect the connectors.
(b) Engage the 3 clips and 4 claws and install the
instrument cluster lower finish panel.
31. INSTALL LOWER INSTRUMENT PANEL LH
(a) Install the lower instrument panel with the 4 <F>
bolts.
32. INSTALL LOWER INSTRUMENT PANEL FINISH
PANEL SUB-ASSEMBLY LH
(a) Engage the 5 clips and claw and install the lower
instrument panel finish panel.
(b) Install the 2 <F> bolts.
B133862
B133861
B133864
B133860
IP–30
INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY
IP
33. CONNECT HOOD LOCK CONTROL LEVER SUB-
ASSEMBLY
(a) Engage the 3 claws and install the hood lock control
lever.
34. INSTALL NO. 1 INSTRUMENT PANEL REGISTER
ASSEMBLY
(a) Engage the 4 clips and 2 claws and install the
instrument panel register.
35. INSTALL INSTRUMENT LOWER COVER SUB-
ASSEMBLY
(a) Engage the 3 clips and 2 claws and install the
instrument lower cover.
(b) Install the 2 <F> bolts and 2 clips.
B133859
B133853
B133852
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст