Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 244
INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY
IP–19
IP
48. REMOVE INSTRUMENT CLUSTER CENTER FINISH
PANEL SUB-ASSEMBLY
(a) Remove the 2 <B> screws.
(b) Disengage the 4 claws and remove the instrument
cluster center finish panel.
49. REMOVE INSTRUMENT CLUSTER LOWER CENTER
FINISH PANEL SUB-ASSEMBLY
(a) Remove the 3 <B> screws.
(b) Disengage the 2 clips and 3 claws and remove the
instrument cluster lower center finish panel.
50. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
(a) Remove screw <B>.
(b) Disengage the 2 claws and remove the side
defroster nozzle duct.
51. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
(a) Remove screw <B>.
(b) Disengage the 2 claws and remove the side
defroster nozzle duct.
B133872
B133880
B133874
B133873
IP–20
INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY
IP
52. REMOVE DEFROSTER NOZZLE ASSEMBLY
(a) Remove the 5 <B> screws.
(b) Disengage the 9 claws and remove the defroster
nozzle.
53. REMOVE NO. 3 HEATER TO REGISTER DUCT
(a) Remove the 2 <B> screws and remove the heater to
register duct.
54. REMOVE NO. 2 INSTRUMENT PANEL WIRE
(a) Disengage the 16 clamps and remove the
instrument panel wire.
55. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(See page
B133875
B133876
B133892
INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY
IP–21
IP
56. REMOVE INSTRUMENT PANEL CENTER BRACKET
SUB-ASSEMBLY
(a) Remove the 2 <B> screws and remove the
instrument panel center bracket.
57. REMOVE ACCESSORY METER BRACKET
(a) Remove the 2 clips and remove the accessory
meter bracket.
58. REMOVE LOWER INSTRUMENT PANEL SUB-
ASSEMBLY RH
(a) Disengage the 2 clips and remove the lower
instrument panel.
59. REMOVE LOWER INSTRUMENT PANEL SUB-
ASSEMBLY LH
HINT:
Use the same procedure as for the RH side.
60. REMOVE INSTRUMENT PANEL FINISH PANEL END
LH
(a) Disengage the 3 claws and remove the instrument
panel finish panel end.
INSTALLATION
1.
INSTALL LOWER INSTRUMENT PANEL SUB-
ASSEMBLY RH
(a) Engage the 2 clips and install the lower instrument
panel.
2.
INSTALL LOWER INSTRUMENT PANEL SUB-
ASSEMBLY LH
HINT:
Use the same procedure as for the RH side.
B133877
B133882
B133879
B133889
B133879
IP–22
INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY
IP
3.
INSTALL ACCESSORY METER BRACKET
(a) Install the accessory meter bracket with the 2 clips.
4.
INSTALL INSTRUMENT PANEL CENTER BRACKET
SUB-ASSEMBLY
(a) Install the instrument panel center bracket with the 2
<B> screws.
5.
INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
(See page
6.
INSTALL NO. 2 INSTRUMENT PANEL WIRE
(a) Engage the 16 clamps and install the instrument
panel wire.
7.
INSTALL NO. 3 HEATER TO REGISTER DUCT
(a) Install the heater to register duct with the 2 <B>
screws.
B133882
B133877
B133892
B133876
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст