Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 193
EXTERIOR – FRONT BUMPER
ET–3
ET
RADIATOR LOWER GRILLE
x5
FRONT BUMPER PAD RH
FRONT VALANCE
LOWER PANEL
FRONT BUMPER PAD LH
x2
x6
x5
x2
N*m (kgf*cm, ft*lbf) : Specified torque
8.0 (80, 71 in.*lbf)
B135067E01
ET–4
EXTERIOR – FRONT BUMPER
ET
REMOVAL
1.
REMOVE RADIATOR GRILLE
(a) Using a clip remover, remove the 2 clips.
(b) Remove the 2 screws.
(c) Disengage the 5 clips and remove the radiator grille.
2.
REMOVE FRONT BUMPER COVER
(a) Apply protective tape as shown in the illustration.
(b) Using a clip remover, remove the 5 clips.
B134729
Protective Tape
B134730E01
B138606
EXTERIOR – FRONT BUMPER
ET–5
ET
(c) Remove the 8 screws and the 4 bolts.
(d) Disengage the 2 claws and remove the front
bumper cover.
(e) Remove the 4 clips.
3.
REMOVE FRONT BUMPER SIDE SUPPORT LH
(a) Remove the 2 screws.
(b) Disengage the 2 claws and remove the front
bumper side support.
4.
REMOVE FRONT BUMPER SIDE SUPPORT RH
HINT:
Use the same procedure as for the LH side.
B134731
B134733
B138601
B134734
ET–6
EXTERIOR – FRONT BUMPER
ET
5.
REMOVE FRONT BUMPER FILLER LH
(a) Disengage the clip and the 2 claws and remove the
front bumper filler.
6.
REMOVE FRONT BUMPER FILLER RH
HINT:
Use the same procedure as for the LH side.
7.
REMOVE FRONT BUMPER UPPER RETAINER
(a) Remove the 3 bolts.
(b) Disengage the 2 hooks and remove the front
bumper upper retainer.
8.
REMOVE FRONT BUMPER REINFORCEMENT
(a) Remove the 4 nuts and the front bumper
reinforcement.
9.
REMOVE FRONT BUMPER EXTENSION LH
(a) Remove the 4 nuts and the front bumper extension.
10. REMOVE FRONT BUMPER EXTENSION RH
HINT:
Use the same procedure as for the LH side.
B134735
B134736
B134737
B134738
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст