Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 194
EXTERIOR – FRONT BUMPER
ET–7
ET
DISASSEMBLY
1.
REMOVE FRONT BUMPER PAD LH
(a) Remove the 5 retainers and the front bumper pad.
(b) Disengage the 5 claws and remove the front
bumper pad.
2.
REMOVE FRONT BUMPER PAD RH
HINT:
Use the same procedure as for the LH side.
3.
REMOVE RADIATOR LOWER GRILLE
(a) Disengage the 11 claws and remove the radiator
lower grille.
4.
REMOVE FRONT VALANCE LOWER PANEL
(a) Remove the 6 nuts.
(b) Disengage the 5 claws and remove the front
valance lower panel.
B135070
B135068
B135069
ET–8
EXTERIOR – FRONT BUMPER
ET
REASSEMBLY
1.
INSTALL FRONT VALANCE LOWER PANEL
(a) Engage the 5 claws and install the front bumper
lower panel.
(b) Tighten the 6 nuts.
Torque: 8.0 N*m (80 kgf*cm, 71 in.*lbf)
2.
INSTALL RADIATOR LOWER GRILLE
(a) Engage the 11 claws and install the radiator lower
grille.
3.
INSTALL FRONT BUMPER PAD LH
(a) Engage the 5 claws and install the front bumper
pad.
(b) Install the 5 retainers.
4.
INSTALL FRONT BUMPER PAD RH
HINT:
Use the same procedure as for the LH side.
B135069
B135068
B135070
EXTERIOR – FRONT BUMPER
ET–9
ET
INSTALLATION
1.
INSTALL FRONT BUMPER EXTENSION LH
(a) Install the front bumper extension with the 4 nuts.
Torque: 65 N*m (665 kgf*cm, 48 ft.*lbf)
2.
INSTALL FRONT BUMPER EXTENSION RH
HINT:
Use the same procedure as for the LH side.
3.
INSTALL FRONT BUMPER REINFORCEMENT
(a) Install the front bumper reinforcement with the 4
nuts.
Torque: 65 N*m (665 kgf*cm, 48 ft.*lbf)
4.
INSTALL FRONT BUMPER UPPER RETAINER
(a) Engage the 2 hooks and install the front bumper
upper retainer.
(b) Tighten the 3 bolts.
Torque: 8.0 N*m (80 kgf*cm, 71 in.*lbf)
5.
INSTALL FRONT BUMPER FILLER LH
(a) Engage the clip and the 2 claws and install the front
bumper filler.
6.
INSTALL FRONT BUMPER FILLER RH
HINT:
Use the same procedure as for the LH side.
7.
INSTALL FRONT BUMPER SIDE SUPPORT LH
(a) Engage the 2 claws and install the front bumper
side support.
(b) Tighten the 2 screws.
Torque: 3.0 N*m (30 kgf*cm, 27 in.*lbf)
8.
INSTALL FRONT BUMPER SIDE SUPPORT RH
HINT:
Use the same procedure as for the LH side.
B134738
B134737
B134736
B134735
B134734
ET–10
EXTERIOR – FRONT BUMPER
ET
9.
INSTALL FRONT BUMPER COVER
(a) Install the 4 clips.
(b) Engage the 2 claws and install the front bumper
cover.
(c) Tighten the 8 screws and the 4 bolts.
Torque: 3.0 N*m (30 kgf*cm, 27 in.*lbf) for screw
8.0 N*m (80 kgf*cm, 71 in.*lbf) for bolt
B138601
B134733
B134732
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст