Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 462
SEAT – REAR SEAT ASSEMBLY (for LH Side)
SE–29
SE
REMOVAL
1.
REMOVE REAR SEAT CUSHION ASSEMBLY
(a) Remove the 2 bolts and the rear seat cushion.
2.
REMOVE REAR SEATBACK BOARD CARPET
ASSEMBLY
(a) Pull the rear seatback lock release button and tilt
the rear seatback forward.
(b) Disengage the 8 clips and remove the rear seatback
board carpet.
3.
REMOVE REAR SEATBACK ASSEMBLY
(a) Remove the rear center seat inner belt from the rear
seatback holder.
(b) Remove the 2 bolts.
(c) Disengage the hook and remove the rear seatback.
B130718
B130720
B130721
SE–30
SEAT – REAR SEAT ASSEMBLY (for LH Side)
SE
DISASSEMBLY
CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat
cushion frame and the rear seatback frame could cause
injuries to your hands.
1.
REMOVE REAR SEAT CUSHION HINGE SUB-
ASSEMBLY
HINT:
Use the same procedure for both sides.
(a) Remove the bolt.
(b) Disengage the hook and remove the rear seat
cushion hinge.
2.
REMOVE REAR SEAT CUSHION UNDER COVER
(a) Remove the rear seat cushion stopper from the rear
seat cushion cover band and the slit of the rear seat
cushion under cover.
(b) Using a clip remover, remove the 5 clips and the
rear seat cushion under cover.
3.
REMOVE REAR SEAT CUSHION STOPPER
(a) Remove the screw and the rear seat cushion
stopper.
4.
REMOVE REAR SEAT CUSHION FRAME SUB-
ASSEMBLY
(a) Disengage the hook and remove the rear seat
cushion frame.
B130723
Band
B130724E01
B130725
B130726
SEAT – REAR SEAT ASSEMBLY (for LH Side)
SE–31
SE
5.
REMOVE REAR SEAT CUSHION COVER
(a) Remove the 10 hog rings and the rear seat cushion
cover.
6.
REMOVE REAR SEAT HEADREST ASSEMBLY
(a) Push the lock button of the rear seat headrest
support and remove the rear seat headrest.
7.
REMOVE REAR SEATBACK LOCK COVER
(a) Remove the screw.
(b) Disengage the claw and remove the rear seat back
lock cover.
8.
REMOVE TETHER ANCHOR COVER
(a) Using a screwdriver with its tip wrapped in
protective tape, disengage the 2 claws and open the
cover.
B130727
Lock Button
B130730E01
B130731
Protective Tape
B130732E01
SE–32
SEAT – REAR SEAT ASSEMBLY (for LH Side)
SE
(b) Using a screwdriver with its tip wrapped in
protective tape, disengage the 3 claws and remove
the tether anchor cover.
9.
REMOVE REAR SEAT HEADREST SUPPORT
(a) Remove the 14 hog rings.
(b) Disengage the 2 claws and remove the rear seat
headrest support.
HINT:
Use the same procedure for both sides.
10. REMOVE REAR SEATBACK LOCK RELEASE
BUTTON
(a) Remove the rear seatback lock release button.
Protective Tape
B130734E01
B130736
B130739
B130743
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст