Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 454

SEAT – REAR SEAT ASSEMBLY (for RH Side)

SE–49

SE

REASSEMBLY

CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat
cushion frame and the rear seatback frame could cause
injuries to your hands.

1.

INSTALL REAR SEATBACK COVER
(a) Using hog ring pliers, install the rear seatback cover

with 8 new hog rings.
NOTICE:
•

Do not soil or scratch the rear seatback
cover.

•

When installing the hog rings, minimize
wrinkles as far as possible.

(b) Pass the hook of the rear seatback cover through

the slit in the rear seatback pad.

2.

INSTALL REAR CENTER SEAT OUTER BELT
ASSEMBLY (See page

SB-67

)

3.

INSTALL REAR SEATBACK LOCK ASSEMBLY
(a) Install the rear seatback lock with the 2 bolts.

Torque: 18 N*m (185 kgf*cm, 13 ft.*lbf)

New Hog Ring

Hog Ring Pliers

B130775E01

B130772

SE–50

SEAT – REAR SEAT ASSEMBLY (for RH Side)

SE

4.

INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY
(a) Install the rear seatback frame.

(b) Using hog ring pliers, install 17 new hog rings.

(c) Install the belt of the rear center seat outer belt into

the rear seatback cover band.

B130768

New Hog Ring

Hog Ring Pliers

B130767E01

Band

B135129E01

SEAT – REAR SEAT ASSEMBLY (for RH Side)

SE–51

SE

5.

INSTALL REAR SEATBACK STOP BUTTON
GROMMET
(a) Engage the 2 claws and install the rear seatback

stop button grommet.

6.

INSTALL REAR SEATBACK LOCK RELEASE
BUTTON
(a) Install rear seatback lock release button.

7.

INSTALL REAR SEAT HEADREST SUPPORT
HINT:
Use the same procedure to install all the rear seat
headrest supports.
(a) Align the protruding portion of the rear seat headrest

support with the installation groove of the rear
seatback frame.

(b) Engage the 2 claws and install the rear seat

headrest support.

8.

INSTALL TETHER ANCHOR COVER
HINT:
Use the same procedure for both sides.
(a) Engage the 3 claws and install the tether anchor

cover.

B130771

B130773

Protrusion

B130770E01

B130765

SE–52

SEAT – REAR SEAT ASSEMBLY (for RH Side)

SE

(b) Engage the 2 claws and close the cover.

9.

INSTALL REAR SEATBACK LOCK COVER
(a) Engage the claw and install the rear seatback lock

cover.

(b) Tighten the screw.

10. INSTALL REAR SEAT SHOULDER BELT COVER

(a) Engage the 4 claws and install the rear seat

shoulder belt cover.

11. INSTALL REAR CENTER SEAT HEADREST

ASSEMBLY
(a) Push the lock button of the rear seat headrest

support and install the rear seat headrest.

12. INSTALL REAR SEAT HEADREST ASSEMBLY

(a) Push the lock button of the rear seat headrest

support and install the rear seat headrest.

B130763

B130761

B135122

Lock Button

B130760E01

Lock Button

B130759E01