Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 2

DOOR LOCK – WIRELESS DOOR LOCK BUZZER

DL–121

DL

(b) Disconnect the connector and remove the wireless

door lock buzzer.

INSPECTION

1.

INSPECT WIRELESS DOOR LOCK BUZZER
(a) Check the resistance.

(1) Using an ohmmeter, measure the resistance

between the terminals.
Standard Resistance

If the result is not as specified, replace the
wireless door lock buzzer.

INSTALLATION

1.

INSTALL WIRELESS DOOR LOCK BUZZER
(a) Connect the connector.

(b) Engage the clamp and install the wireless door lock

buzzer.

2.

INSTALL NO. 1 WIRING HARNESS PROTECTOR
(a) Engage the 4 claws and install the No. 1 wiring

harness protector.

B138139

1

2

B107863

Tester Connection

Specified Condition

1 (B) - 2 (B2)

Approximately 1 k

Ω

B138139

B138138

B138137

DL–122

DOOR LOCK – WIRELESS DOOR LOCK BUZZER

DL

3.

INSTALL FRONT FENDER SPLASH SHIELD SUB-
ASSEMBLY
(a) Engage the 3 clips and install the front fender splash

shield.

(b) Engage the 6 clips.

4.

CONNECT CABLE TO NEGATIVE BATTERY
TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)

B138136

B136004

DRIVE SHAFT – FRONT DRIVE SHAFT (for 4WD)

DS–1

DS

DRIVE LINE

DRIVE SHAFT

FRONT DRIVE SHAFT (for 4WD)

COMPONENTS

FRONT WHEEL
ADJUSTING
LOCK CAP

13 (127, 9)

160 (1,631, 118)

235 (2,396, 174)

91 (928, 67)

COTTER PIN

COTTER PIN

8.3 (85, 73 in.*lbf)

N*m (kgf*cm, ft*lbf) : Specified torque

Non-reusable part

FRONT AXLE HUB NUT

FRONT DRIVE SHAFT

FRONT LOWER BALL
JOINT ATTACHMENT

FRONT SPEED SENSOR

TIE ROD END
SUB-ASSEMBLY

FRONT AXLE HUB
GREASE CAP

C133042E01

DS–2

DRIVE SHAFT – FRONT DRIVE SHAFT (for 4WD)

DS

Non-reusable part

FRONT DRIVE
INNER SHAFT
SNAP RING

TRIPOD

FRONT DRIVE OUTBORARD
JOINT SHAFT ASSEMBLY

FRONT DRIVE
INBOARD JOINT
ASSEMBLY

FRONT DRIVE SHAFT
DUST COVER

FRONT DRIVE SHAFT
HOLE SNAP RING

INBOARD JOINT BOOT

OUTBOARD JOINT BOOT

Supply Part:

FRONT AXLE INBOARD JOINT BOOT CLAMP

FRONT AXLE INBOARD
JOINT BOOT NO. 2 CLAMP

FRONT AXLE OUTBOARD JOINT BOOT CLAMP

FRONT AXLE OUTBOARD
JOINT BOOT NO. 2 CLAMP

FRONT AXLE OUTBOARD
JOINT BOOT NO. 2 CLAMP

C133043E01