Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 297
LIGHTING – REAR COMBINATION LIGHT ASSEMBLY
LI–83
LI
BACK UP
LIGHT BULB
REAR TURN SIGNAL
LIGHT BULB
TAIL AND STOP
LIGHT BULB
REAR TURN SIGNAL
LIGHT BULB SOCKET
TAIL AND STOP LIGHT
BULB SOCKET
BACK UP LIGHT
BULB SOCKET
REAR COMBINATION
LIGHT BODY
Non-reusable part
REAR COMBINATION
LIGHT GASKET
E127210E01
LI–84
LIGHTING – REAR COMBINATION LIGHT ASSEMBLY
LI
REMOVAL
HINT:
•
Use the same procedure for both the RH and LH sides,
unless otherwise specified.
•
The procedure described below is for the LH side.
1.
DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2.
REMOVE REAR SEATBACK BOARD CARPET
ASSEMBLY RH (See page
3.
REMOVE REAR SEATBACK ASSEMBLY RH (See
page
)
4.
REMOVE REAR SEATBACK BOARD CARPET
ASSEMBLY LH (See page
5.
REMOVE REAR SEATBACK ASSEMBLY LH (See
page
)
6.
REMOVE REAR FLOOR BOARD (See page
7.
REMOVE REAR FLOOR MAT SUPPORT PLATE (See
page
8.
REMOVE REAR FLOOR MAT ASSEMBLY (See page
)
9.
REMOVE LUGGAGE HOLD BELT STRIKER
ASSEMBLY (See page
10. REMOVE FRONT DOOR SCUFF PLATE RH (See page
)
11. REMOVE FRONT DOOR SCUFF PLATE LH (See page
)
12. REMOVE REAR DOOR SCUFF PLATE RH (See page
)
13. REMOVE REAR DOOR SCUFF PLATE LH (See page
)
14. REMOVE FRONT DOOR OPENING TRIM
WEATHERSTRIP RH (See page
15. REMOVE FRONT DOOR OPENING TRIM
WEATHERSTRIP LH (See page
16. REMOVE DECK SIDE GARNISH (w/ Woofer) (See
page
17. REMOVE SPEAKER MOUNTING COVER (w/ Woofer)
(See page
)
18. REMOVE BOX SPEAKER ASSEMBLY (w/ Woofer)
(See page
)
19. REMOVE PACKAGE HOLDER NET HOOK (See page
)
20. REMOVE QUARTER TRIM POCKET TRAY (w/o
LIGHTING – REAR COMBINATION LIGHT ASSEMBLY
LI–85
LI
21. REMOVE SIDE TRIM COVER (w/o Woofer) (See page
22. REMOVE QUARTER TRIM POCKET (w/o Woofer)
23. REMOVE LAP BELT OUTER ANCHOR COVER (See
page
)
24. REMOVE REAR SEAT OUTER BELT ASSEMBLY RH
25. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH
26. REMOVE REAR DECK TRIM COVER (w/ Power
Outlet Socket) (See page
)
27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
28. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
29. REMOVE REAR COMBINATION LIGHT ASSEMBLY
(a) Remove the 3 nuts.
(b) Disconnect the 3 connectors and remove the rear
combination light.
DISASSEMBLY
1.
REMOVE REAR COMBINATION LIGHT GASKET
(a) Remove the rear combination light gasket.
NOTICE:
•
Detach the gasket if it adheres to the body.
•
Do not reuse a removed gasket. Replace it
with a new one to prevent water from
entering.
2.
REMOVE TAIL AND STOP LIGHT BULB
(a) Turn the rear combination light socket and bulb, in
the direction indicated by the arrow in the
illustration, to remove them.
(b) Remove the rear combination light bulb from the
light socket.
E127201
E127202
E127203
LI–86
LIGHTING – REAR COMBINATION LIGHT ASSEMBLY
LI
3.
REMOVE BACK UP LIGHT BULB
(a) Turn the rear combination light socket and bulb, in
the direction indicated by the arrow in the
illustration, to remove them.
(b) Remove the rear combination light bulb from the
light socket.
4.
REMOVE REAR TURN SIGNAL LIGHT BULB
(a) Turn the rear combination light socket and bulb, in
the direction indicated by the arrow in the
illustration, to remove them.
(b) Remove the rear combination light bulb from the
light socket.
REASSEMBLY
1.
INSTALL REAR TURN SIGNAL LIGHT BULB
(a) Install the rear combination light bulb into the light
socket.
(b) Turn the rear combination light socket and bulb, in
the direction indicated by the arrow in the
illustration, to install them.
2.
INSTALL BACK UP LIGHT BULB
(a) Install the rear combination light bulb into the light
socket.
(b) Turn the rear combination light socket and bulb, in
the direction indicated by the arrow in the
illustration, to install them.
3.
INSTALL TAIL AND STOP LIGHT BULB
(a) Install the rear combination light bulb into the light
socket.
(b) Turn the rear combination light socket and bulb, in
the direction indicated by the arrow in the
illustration, to install them.
E127205
E127207
E127208
E127206
E127204
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст