Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 254
INTERIOR – ROOF HEADLINING
IR–19
IR
32. REMOVE QUARTER TRIM POCKET TRAY (w/o
Woofer)
(a) Disengage the 7 claws and remove the quarter trim
pocket tray.
33. REMOVE SIDE TRIM COVER (w/o Woofer)
(a) Disengage the 8 claws and remove the side trim
cover.
34. REMOVE QUARTER TRIM POCKET (w/o Woofer)
(a) Disengage the 6 claws and remove the quarter trim
pocket.
B130611
B130612
B130613
IR–20
INTERIOR – ROOF HEADLINING
IR
35. REMOVE LAP BELT OUTER ANCHOR COVER
HINT:
Use the same procedure for both sides.
(a) Disengage the 3 claws and remove the lap belt
outer anchor cover.
36. REMOVE REAR SEAT OUTER BELT ASSEMBLY RH
(a) Remove the bolt and the anchor plate.
37. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH
HINT:
Use the same procedure as for the RH side.
38. REMOVE REAR DECK TRIM COVER (w/ Power
Outlet Socket)
(a) Disengage the 8 claws and remove the rear deck
trim cover.
for RH Side:
for LH Side:
B130614E01
B130615
B135130
INTERIOR – ROOF HEADLINING
IR–21
IR
(b) Disconnect the power outlet connector.
39. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
(a) Remove the 4 screws.
(b) Disengage the 6 clips and the 8 claws and remove
the deck trim side panel.
40. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
(a) Remove the 3 screws.
B138600
B130616
B130617
B130618
IR–22
INTERIOR – ROOF HEADLINING
IR
(b) Disengage the 6 clips and the 8 claws and remove
the deck trim side panel.
41. REMOVE ROOF SIDE INNER GARNISH RH
(a) Using a screwdriver with its tip wrapped in
protective tape, disengage the claw and open the
cover.
(b) Remove the bolt and the clip.
(c) Disengage the 7 clips and the claw and remove the
roof side inner garnish.
(d) Pass the rear seat outer belt through the slit in the
roof side inner garnish.
42. REMOVE ROOF SIDE INNER GARNISH LH
HINT:
Use the same procedure as for the RH side.
B130619
Protective Tape
B130620E01
B130622
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст