Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 242

INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY

IP–11

IP

17. REMOVE INTEGRATION CONTROL AND PANEL

ASSEMBLY
(a) Remove the 2 <H> screws.
(b) Disengage the 4 clips and remove the integration

control panel assembly.

(c) Disconnect the 3 connectors.

18. REMOVE RADIO RECEIVER ASSEMBLY (See page

AV-55

)

19. REMOVE PARKING BRAKE HOLE COVER SUB-

ASSEMBLY
(a) Disengage the 2 A claws and 2 B claws.
(b) Slide the parking brake hole cover toward the front

of the vehicle, disengage the 2 C claws and remove
the parking brake hole cover.

20. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for

Manual Transmission)
(a) Remove the shift lever knob.

21. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for

4WD)
(a) Remove the shift lever knob.

B133888

Claw A

Claw C

Claw B

B133898E02

B133893

B133895

IP–12

INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY

IP

22. REMOVE CONSOLE UPPER REAR PANEL SUB-

ASSEMBLY
(a) Shift the shift lever into the N position.
(b) Disengage the 5 clips and 3 claws and remove the

console upper rear panel.

23. REMOVE BOX BOTTOM MAT

(a) Remove the box bottom mat.

24. REMOVE FRONT CONSOLE BOX

(a) Remove the 4 <D> bolts.
(b) Disengage the 5 claws and remove the console box.

25. REMOVE CONSOLE UPPER PANEL NO. 1 GARNISH

(a) Disengage claw A and the clip.
(b) Slide the console upper panel garnish toward the

rear of the vehicle, disengage the claw B and
remove the console upper panel garnish.

B133897

B133899

B133851

Claw B

Claw A

Clip

B133900E01

INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY

IP–13

IP

26. REMOVE INSTRUMENT LOWER COVER SUB-

ASSEMBLY
(a) Remove the 2 clips and 2 <F> bolts.
(b) Disengage the 3 clips and 2 claws and remove the

instrument lower cover.

27. REMOVE NO. 1 INSTRUMENT PANEL REGISTER

ASSEMBLY
(a) Disengage the 4 clips and 2 claws and remove the

instrument panel register.
NOTICE:
•

To avoid breakage of the register, remove the
instrument panel register with the shut
damper of the register open.

•

Pull the instrument panel register up
diagonally to remove it.

28. SEPARATE HOOD LOCK CONTROL LEVER SUB-

ASSEMBLY
(a) Disengage the 3 claws and separate the hood lock

control lever.

B133852

B133853

B133859

IP–14

INSTRUMENT PANEL – INSTRUMENT PANEL ASSEMBLY

IP

29. REMOVE LOWER INSTRUMENT PANEL FINISH

PANEL SUB-ASSEMBLY LH
(a) Remove the 2 <F> bolts.
(b) Disengage the 5 clips and claw and remove the

lower instrument panel finish panel.

30. REMOVE LOWER INSTRUMENT PANEL LH

(a) Remove the 4 <F> bolts and remove the lower

instrument panel.

31. REMOVE INSTRUMENT CLUSTER FINISH PANEL

(a) Disengage the 3 clips and the 4 claws and remove

the instrument cluster finish panel.

(b) Disconnect the connectors.

32. REMOVE COMBINATION METER ASSEMBLY

(a) Remove the 4 screws.

B133860

B133864

B133861

B133862