Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 446
SB–48
SEAT BELT – FRONT SEAT OUTER BELT ASSEMBLY
SB
(h) Dispose of the front seat outer belt (with the seat
belt pretensioner).
CAUTION:
•
Do not touch the front seat outer belt for at
least 30 minutes after the seat belt
pretensioner has been activated. It is very
hot.
•
Use gloves and safety glasses when handling
a front seat outer belt with a pretensioner that
has been activated.
•
Always wash your hands with water after
completing the operation.
•
Do not apply water to a front seat outer belt
that has an activated pretensioner.
(1) Place the front seat outer belt in a plastic bag,
tie the end tightly and dispose of it in the same
way as other general parts.
Plastic Bag
B114475E01
SEAT BELT – REAR SEAT INNER BELT ASSEMBLY
SB–49
SB
RESTRAINTS
SEAT BELT
REAR SEAT INNER BELT ASSEMBLY
COMPONENTS
REAR SEAT INNER
BELT ASSEMBLY
N*m (kgf*cm, ft*lbf) : Specified torque
42 (430, 31)
REAR SEAT INNER
BELT ASSEMBLY
42 (430, 31)
for RH Side:
for LH Side:
B135172E01
SB–50
SEAT BELT – REAR SEAT INNER BELT ASSEMBLY
SB
REMOVAL
1.
REMOVE REAR SEAT INNER BELT ASSEMBLY
(a) for RH Side:
(1) Pull up the rear seat cushion.
(2) Remove the buckle from the rear seatback
pocket.
(3) Remove the bolt, the anchor plate of the rear
center seat outer belt and the rear seat inner
belt.
(b) for LH Side:
(1) Pull up the rear seat cushion.
(2) Remove the buckle from the rear seatback
band.
(3) Remove the bolt, the anchor plate of the rear
center seat inner belt and the rear seat inner
belt.
INSTALLATION
1.
INSTALL REAR SEAT INNER BELT ASSEMBLY
(a) for RH Side:
(1) Align the jam hole in the anchor plate of the
rear seat inner belt with the stud bolt of the
body and provisionally install the anchor plate.
(2) Install the anchor plate of the rear center seat
inner belt with the bolt.
Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)
NOTICE:
Do not place the anchor plate over the
convex areas of the rear seat inner belt.
(3) Install the buckle into the rear seatback pocket.
(4) Install the rear seat cushion.
(b) for LH Side:
(1) Align the jam hole in the anchor plate of the
rear seat inner belt with the stud bolt of the
body and provisionally install the anchor plate.
(2) Install the anchor plate of the rear center seat
inner belt with the bolt.
Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)
NOTICE:
Do not place the anchor plate over the
convex areas of the rear seat inner belt.
(3) Install the buckle into the rear seatback band.
(4) Install the rear seat cushion.
B135167E01
Band
B135173E01
Convex
Jam Hole
B135168E01
Convex
Jam Hole
Band
B135174E01
SEAT BELT – REAR SEAT OUTER BELT ASSEMBLY
SB–51
SB
RESTRAINTS
SEAT BELT
REAR SEAT OUTER BELT ASSEMBLY
COMPONENTS
for RH Side:
for LH Side:
37 (375, 27)
N*m (kgf*cm, ft*lbf) : Specified torque
37 (375, 27)
37 (375, 27)
42 (430, 31)
37 (375, 27)
REAR SEAT INNER
BELT ASSEMBLY RH
REAR CENTER SEAT
INNER BELT ASSEMBLY
REAR SEAT INNER
BELT ASSEMBLY LH
REAR SEATBACK
ASSEMBLY
REAR SEATBACK BOARD
CARPET ASSEMBLY
REAR SEATBACK
ASSEMBLY
REAR SEATBACK BOARD
CARPET ASSEMBLY
B130654E02
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст